Mechanical Reassembly Procedure
1. Assemble Bottom Cover Module / DC DC / Blower
No
Procedure
1
Assemble the Bottom Cover:
(1) Screw 1 screw to
assemble the Elevator Foot.
(2) Screw 1 screw to
assemble the Ballast-to-lamp
connector Module
2
Assemble DC DC / Blower:
(1) Screw 1 screw to
assemble the DC DC Module.
(1) Screw 3 screws to
assemble the Blower.
Notice: Please ensure the
blue wire arrangement (The
direction should be heading
forward as the picture shows)
while assembling the DC DC
Module.
29
(1) Elevator Foot
(2) Ballast-to-lamp
connector moduel
The direction should be
heading forward
Photo
(2) Blower
(1) DC DC Module
Chapter 3