Acer P5271 Service Manual page 19

Item Icon
1 Infrared transmitter Sends signals to the projector.
2 Laser pointer
3 FREEZE
4 HIDE
5 RESYNC
6 SOURCE
7 POWER
8 ASPECT RATIO
9 ZOOM
10 Laser button
11 Empowering key
12 KEYSTONE
13 MENU
14 PA�E
15 R�B
16 BRI�HTNESS
17 CONTRAST
18 COLOR
19 V�A
20 COMPONENT
Function
Aim the remote at the viewing screen.
To pause the screen image.
Momentarily turns off the video. Press "HIDE� to hide the
image, press again to display the image.
Automatically synchronizes the projector to the input
source.
Press "SOURCE� to choose from R�B, Component, S-
Video, Composite, SCART, HDTV and HDMI™ sources.
Refer to the "Turning the Projector On/Off� section.
To choose the desired aspect ratio (Auto/4:3/16:9)
Zooms the projector display in or out.
Aim the remote at the viewing screen, press and hold this
button to activate the laser pointer.
This function is not supported in Japanese market.
Unique Acer functions: eOpening, eView, eTimer, ePower
Management.
Adjusts the image to compensate for distortion caused by
tilting the projector (± 40 degrees).
• Press "MENU� to launch the Onscreen display
(OSD) menu, back to the previous step for the
OSD menu operation or exit the OSD menu.
• Confirm your selection of items.
For computer mode only. Use this button to select the next
or previous page. This function is only available when con-
nected to a computer via a USB cable.
Press "R�B� for true-color optimization.
Press "BRI�HTNESS� to adjust the brightness of the im-
age.
Use the "CONTRAST� option to control the difference be-
tween the lightest and darkest parts of the picture.
Press "COLOR� to adjust the color temperature of image.
Press "V�A� to change source to the V�A connector. This
connector supports analog R�B, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and R�Bsync.
Press "COMPONENT� to change source to Component
video. This connection supports YPbPr (480p/576p/720p/
1080i) and YCbCr (480i/576i).
P5271/P5290/ P5271i/P5390W Confidential
Description
1-12