Remove The S-Board - Panasonic TH-P50S10D Service Manual

2. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
3. Remove the Rear cover hooks (L, R).

7.19. Remove the S-Board

1. Remove the Cabinet assy. (See section 7.18.)
2. Remove the S-Board shield case.
3. Remove the screws (×2
unit.
4. Disconnect the connector (S1).
5. Remove the Power button.
6. Remove the screw (×1
24
) and remove the S-Board
) and remove the S-Board.