Table of Contents
Advertisement
ENGLISH
Talking to
TALK button
Another Person
1. Press and hold the
TALK button.
2. With the
microphone about
2 inches (5 cm)
from your mouth,
speak in a normal voice.
3. Release the button
when you're finished talking and listen for a
response. You cannot receive incoming calls
while pressing the TALK button.
"Roger Beep"
Confirmation Tone
Your listener will hear an audible tone when
you release the TALK button. This alerts the
other party that you are finished talking and
it is OK for them to speak.
Listening for a Response
When you are finished talking:
1.
Release the TALK button to receive
incoming transmissions. Your microTALK
®
is always in listening mode while the TALK
button is not pressed.
2.
Adjust the volume
by rotating the ON-
OFF/VOLUME switch.
VOLUME
s w i t c h
O P E R AT I O N
Illuminating the Display
1.
Press and release
LIGHT/MAX
the LIGHT/MAX
RANGE
RANGE button to
b u t t o n
illuminate the display
for 10 seconds.
Using the Lock Function
The Lock function locks the CHANNEL and
MODE buttons to prevent accidental operation.
To use the Lock function:
1.
While in Standby mode, press and hold
the LOCK button for one second. The Lock
icon will blink when
LOCK
the unit is locked.
b u t t o n
Buttons and switches
that are NOT locked
are the CALL, LIGHT/
MAX RANGE, TALK
and ON-OFF/VOLUME, which are all fully
functional while the unit is locked.
2.
To "unlock" buttons, press and release the
LOCK button again. The Lock icon disappears
and all buttons will be unlocked.
Auto Squelch
Your microTALK
®
radio is equipped with Auto
Squelch, which automatically shuts off weak
transmissions and unwanted noise due to
terrain, or conditions, or if you've reached
your maximum range limit.
4
Advertisement
Table of Contents
