Table of Contents
Advertisement
11 Configure the settings relating to images and audio [Image/Audio]
11 Configure the settings relating to images and
audio [Image/Audio]
The settings relating to JPEG and H.264 images such as the settings of image quality, audio, etc. can be
configured on this page.
The "Image/Audio" page has the [JPEG/H.264] tab
the [Audio] tab.
When "Quad stream" is selected for "Image capture mode", the [H.264] tab is displayed.
*1
11.1 Configure the settings relating to the image
capture mode [JPEG/H.264]
Click the [JPEG/H.264] tab on the "Image/Audio" page. (®page 56, page 58)
[Image capture mode]
Select an image to be displayed on the "Live" page.
The following "Image capture mode" settings can be configured depending on the mounting position. Refer to
"1.2 About live image types " for further information about each "Image capture mode" setting.
–
<Ceiling> <Wall>
9M Fisheye/4M Fisheye
–
<Ceiling>
Double Panorama/Quad PTZ/Single PTZ/8M Fisheye + Double Panorama/4M Fisheye + Double
Panorama/8M Fisheye + Quad PTZ/4M Fisheye + Quad PTZ/Quad stream
–
<Wall>
Panorama/Quad PTZ/Single PTZ/8M Fisheye + Panorama/4M Fisheye + Panorama
Default: 9M Fisheye
IMPORTANT
•
For information on images that can be selected in "Image capture mode", refer to page 9.
•
If the "Image capture mode" setting is changed when the following area settings are configured, perform
the area setting again.
–
Privacy zone (®page 106)
–
VMD area (®page 128)
–
VIQS area (®page 108)
–
Mask area (®page 97)
•
The preset position must be configured again when the mounting position of "Image capture mode" is
changed (such as when changing from "<Ceiling>" to "<Wall>"). (page 100)
Note
•
When "<Ceiling>" is selected for "Image capture mode", "Upside-down" settings can be configured on
the [Basic] tab of the "Basic" page.
80
Operating Instructions
, the [Cam. Function] tab, the [Image/Position] tab, and
*1
Advertisement
Table of Contents
