Factory Mode; How To Store Sam Settings; How To Exit Sam - Philips 43PUS7303/12 Service Manual

With the "LEFT/RIGHT" keys, it is possible to:

– (De) activate the selected menu item.
– (De) activate the selected sub menu.
– Change the value of the selected menu item.
When you press the MENU button once while in top level SAM, the set will switch to the normal user menu (with the SAM mode still active in the

background).

How to Store SAM Settings

To store the settings changed in SAM mode (except the RGB Align settings), leave the top level SAM menu by using the POWER button on the
remote control transmitter or the television set. The mentioned exceptions must be stored separately via the STORE button.

How to Exit SAM

Use one of the following methods:
Switch the set to STANDBY by pressing the mains button on the remote control transmitter or the television set.

Via a standard RC-transmitter, key in "00" sequence.

Note: When the TV is switched "off" by a power interrupt while in SAM, the TV will show up in "normal operation mode" as soon as the power is
supplied again. The error buffer will not be cleared.
SAM mode overview
Remark: Under main menu "NVM editor", you can use the UP/DOWN keys to view and change the set Type number, the set Production code or
the 18AC of a part.(The NVM-editor still has the same function as before, alpha-numeric entry.)

4.3 Factory mode:

Purpose
To perform extended alignments.

Specifications
Displaying and or changing Panel ID information.

Displaying and or changing Tuner ID information.

Error buffer clearing.

Various software alignment settings.

Testpattern displaying.
