Page 1
Register your product and get support at 5000 series www.philips.com/TVsupport User Manual 24PFS5505 24PFS5525 24PFS5535 24PFS5605 24PFT5505 24PFT5525 32PFS5605 32PHS5505 32PHS5525 32PHT5505 32PHT5525 43PFS5505 43PFS5525 43PFT5505 43PFT5525...
Contents 1 Get Support 12 Environmental 1.1 Identify and Register your TV 12.1 European Energy Label 1.2 TV Help and User Manual 12.2 Product Fiche 1.3 On-line Help and User Manual 12.3 End of Use 1.4 Consumer Care / Repair 13 Specifications 2 Software 13.1 Power...
On-line Help and User Manual To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number. Go to www.philips.com/TVsupport.
Look for OAD updates (Over-the-air Software Download) Scan to search for an Over-the-air software update. (Home) > Settings > Update software > Look Update Software for OAD updates. * The availability of OAD updates is dependent on Search for Updates your country.
Quick Guide Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote Standby / On control, the batteries might be empty. To switch the TV on or back to Standby. To replace the batteries, open the battery 2.
FORMAT To open or close the Picture format menu. SETUP To open the Settings menu. Middle 1. Mute To mute the sound or to restore it. 2. Volume To adjust the volume level. 3. Number keys To select a TV channel directly.
Joystick - Local Control (if available) Joystick - Local Control If you lost the remote control or its batteries are empty, you can still do some basic TV operations. To open the basic menu… 1. With the TV switched on, press the joystick key on the back of the TV to bring up the basic menu.
Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com. - 32PHx450x - VESA MIS-F 100, M6 (Minimum 12 Use the model number of the TV to look for mm, Maximum 16 mm) the Quick Start Guide to download.
Page 9
the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV. Caution Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV.
pad or bracket will not interfere with power connector. Caution Wall mounting the TV requires special skills and Caution should only be performed by qualified personnel. The Wall mounting the TV requires special skills and TV wall mounting should meet safety standards should only be performed by qualified personnel.
Page 11
For 24PFS5535 Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. Switch On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish.
Satellite (if available) Attach the satellite F-type connector to the satellite connection SAT at the back of the TV. For 32" or above (4503, 4504, 5503, 5605-32" series) For 24" (5505, 5525, 5535, 5605-24" series) For 22"/24" (4304, 4354,5304 series) * Network port is only for UK models Video Device HDMI (4503, 5503, 4304, 4354, 4504,...
Page 14
* Network port is only for UK models ** Satellite port is only for xxPxSxxxx series Copy protection For 24" HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu- ray Disc.
Page 15
HDMI - DVI (4304, 4354, 5304, 5605-32" series TV) If you still own a device that only has a DVI connection, you can connect the device to HDMI 2 connection with a DVI to HDMI adapter. Use a DVI to HDMI adapter if your device only has a DVI connection.
Viera Link. Not all brands are fully compatible with Digital Audio Out (4503, 5503, 4304, EasyLink. Example HDMI CEC branding names are 4354, 4504, 5304, 5605-32" series property of their respective owners. SCART (if available) Audio Out - Optical is a high quality sound connection.
Page 17
Headphones (5505, 5525, 5535, 5605-24" series TV) You can connect a set of headphones to the connection on the side of the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately. For 24" For 32"...
** Satellite port is only for xxPxSxxxx series Computer HDMI - DVI (4304, 4354, 5304, 5605-32" series TV) If you still own a device that only has a DVI connection, you can connect the device to HDMI 2 connection with a DVI to HDMI adapter. Use a DVI to HDMI adapter if your device only has a DVI connection.
Smart Card Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes. Insert the smart card into the CAM module. See the instruction you received from the operator. To insert the CAM in the TV…...
Watch Channel on Smart Card You can watch channels which are installed from CI/CAM cards. 1. While watching a TV channel, press LIST to open the channel list. 2. Select: CI+ Channel list . Set Passwords and PIN Codes For some CAMs, you must enter a PIN code to watch USB Hard Drive its channels.
3. Press (Home) , select Settings > Network and press (right) to enter the menu. Warning 4. Select Connect to network and press OK. 5. Select Wired and press OK. The TV constantly The USB Hard Drive is formatted exclusively for this searches for the network connection.
Page 22
searches for the network connection. 6. A message will be shown when the connection is successful. If the connection fails, you can check the DHCP setting of the router. DHCP should be switched on. Network Settings (Home) > Settings > Network > View network settings You can view all current network settings here.
Switch Source Source List - To open the sources menu, press SOURCES . - To switch to a connected device, select the device with the arrows (up) or (down) and press OK. - To close the Source menu without switching to a device, press ...
installlation > Search for channels > Update channels Channels Re-install all channels (Home) > Settings > Antenna/cable About Channels and Switch installlation > Search for channels > Re-install Channels channels 1. Select the country where you are now and To watch TV channels press OK.
Page 25
Symbol rate mode with and and change the number If your cable provider did not give you a with and . To check the frequency, specific symbol rate value to install the TV channels, select Search and press OK. leave the Symbol rate mode setting on Automatic.
Page 26
installation. This will speed up the installation. Satellite (if available) • Unicable - You can use a Unicable system to connect the antenna dish to the TV. You can select About Installing Satellites Unicable for 1 or for 2 satellites at the start of the installation.
Page 27
new channels. Satellite Channel List - Polarisation - Select the polarisation you need. (Home) > Settings > Satellite installlation > - Symbol rate mode - Select Manual to enter symbol Satellite channel list rate. You can select your preferred satellite channel list - Frequency - Enter the frequency for the when press ...
Page 28
With Channel list copy, you can copy the channels > Channel list copy > Copy to TV and press OK. installed on one TV onto another Philips TV of the Enter your PIN code if necessary. same range. With Channel list copy, you avoid the 4.
Subtitles Status To switch on Subtitles, press SUBTITLE. Select Status to view technical information on the channel. You can switch subtitles Subtitle on or Subtitle off . Alternatively you can select Automatic. Clock Automatic Display time on the corner of the TV screen. If language information is part of the digital broadcast and the broadcasted programme is not in your language (the language set on TV), the TV can show...
- Press (green) key to enter with upper-case Create or Edit Favourites Channel List - Press (yellow) key to enter number and symbol LIST > OPTIONS > Create favourites list - Press (blue) key to delete a character Select a channel then press OK to add in a 4.
Page 31
2. Select Antenna - Favourite channels , Cable - 3. Press a colour key to select a colour-coded subject Favourite channels or Satellite - Favourite channels*, at the bottom of the screen. and press OK. Text sub-pages 3. Press OPTIONS , and select Reorder channels. A Text page number can hold several subpages.
Page 32
5. Press (left) repeatedly if necessary, to close the menu.
Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. What You Need Alternatively, you can press ...
Page 34
Set a Recording (Not applied to Turkey models) You can set a recording in the TV Guide. In the TV Guide, a programme set to be recorded is marked with . To see the recording list, press Recordings , a programme set to be recorded is marked with ...
For 5505, 5525, 5535 series TV Recording and Pause TV (Not applied to Turkey models) What You Need Warning The USB Hard Drive is formatted exclusively for this If you connect a USB Hard Drive, you can pause or TV, you cannot use the stored recordings on another record digital TV broadcasts (DVB broadcasts or TV or PC.
Record a Programme Watch a Recording To watch a recording… Record Now 1. Press TV GUIDE. To record the programme you are watching right now, 2. Press the colour key Recordings . press (Record) on the remote control. The 3.
Page 37
Replay Since the TV stores the broadcast you are watching, you can mostly replay the broadcast for a few seconds. To replay a current broadcast… 1. Press (Pause) 2. Press (Rewind). You can press repeatedly to select from where you want to start viewing the paused broadcast.
Photo Options Videos, Photos and With a photo on screen, press OPTIONS to… Music Start slideshow, Stop slideshow Start or stop slideshow. Slideshow transitions 10.1 Set the transition from one picture to the next. From a USB Connection Slideshow frequency Select the display time for each photo.
2. Select USB Flash Drive and press (right) to Music Options select the USB device you need. 3. Select Videos and select one of video, you Options for playing music... can press OK to play the selected video or press ...
11.3 Quick Settings and All Open TV Setting Settings Menus Quick settings menu: 11.1 Press SETUP key on the remote control to find Home Menu Overview frequently used settings in Quick settings menu. - Picture style: Select one of preset picture styles for Press ...
Page 41
- Movie - Ideal for watching movies Adjust the colour enhancement - Game - Ideal for gaming (Home) > Settings > Picture > Advanced > Colour > Colour enhancement Custom a style Select Maximum, Medium, or Minimum to set the level of the colour intensity and the details in bright You can adjust and stored picture settings in in the colours.
Page 42
Screen Edges Gamma (Home) > Settings > Picture > Format and edges > Picture format > Screen edges (Home) > Settings > Picture > Advanced > Contrast > Gamma With Screen edges, you can slightly enlarge the picture to hide distorted edges. Press the arrows ...
Page 43
volume of a connected headphone separately. Clear Sound (Home) > Settings > Sound > Advanced > Clear sound Surround Sound Select On to improve the sound for speech. Ideal for (Home) > Settings > Sound > Surround mode news programmes.
Page 44
the sound of the TV picture. * Not applied to Turkey models. You can set the value in steps of 5ms. Maximum setting is 60ms. CAM Operator Profile (Home) > Settings > General settings > CAM Operator Profile Eco Settings To switch on operator profile for CI+/CAM for easy channel installation and updates.
Page 45
language > Language > Primary text, Secondary Reset TV Settings and Reinstall TV text Reset all settings value to original TV settings Some digital TV broadcasters have several Text languages available. (Home) > Settings > General settings > Factory settings Clock Redo full TV installation , and set TV status back to ...
Page 46
the current code use 8888 and enter a new code. Universal Access Settings (Home) > Settings > Universal access Lock for Programme With Universal Access switched on, the TV is (Home) > Settings > Child lock > Parental prepared for use for the deaf, hard of hearing, blind or partially sighted people.
1 year. You can also find the power consumption values for this ** When the TV is turned off with the remote control product on the Philips website for your country and no function is active. www.philips.com/TVsupport 4503 series TV 12.2...
and no function is active. 5505, 5525, 5535 series TV 24PFx55x5 12.3 End of Use - Energy Efficiency Class : A - Visible Screen Size : 60 cm / 24 inch - On Mode Power Consumption (W) : 22 W Disposal of your old product and batteries - Annual Energy Consumption (kWh) * : 33 kWh - Standby Power Consumption (W) **: 0.30 W...
- 24PHx43x4 : 60 cm / 24 inch Product specifications are subject to change without notice. For more specification details of this product, Display resolution www.philips.com/TVsupport - PHx43x4: 1366x768 Power - Mains power : AC 220-240V +/-10% 4504, 4503 series TV - Ambient temperature : 5°C to 35°C...
- USB 13.6 - Headphones: Stereo 3.5mm mini-jack Multimedia * Network port is only for UK models Supported USB file systems - USB (FAT / FAT 32 / NTFS): only connect USB 4503, 4504, 5503 series TV devices that consume 500 mA of power or less. For 32PHS4504, 32PHS4503, 43PFS5503 Playback formats TV Rear...
Page 52
- Satellite - HDMI 2 - DIGITAL AUDIO OUT: SPDIF - Headphones: Stereo 3.5mm mini-jack - Network LAN - RJ45 (for Freeview HD)* TV Side - DIGITAL AUDIO OUT: SPDIF - CI: Common Interface TV Side - USB - TV ANTENNA: 75 ohm coaxial (IEC) - CI: Common Interface - USB TV Rear...
Settings > Help > User manual to find Philips startup screen the information you are looking for. When the TV is in standby, a Philips startup screen is If the User manual doesn't answer your question, you displayed, then the TV returns to standby mode. This can go to the support website of Philips.
14.4 Picture position is incorrect Channels - Picture signals from some devices may not fit the screen correctly. Check the signal output of the connected device. No digital channels found during the installation Computer picture is not stable See the technical specifications to make sure that your TV supports DVB-T or DVB-C in your country.
behaviour is normal. 14.8 Photos, videos and music from a USB device do not show - Make sure that the USB storage device is set to Mass Storage Class compliant, as described in the storage device's documentation. - Make sure that the USB storage device is compatible with the TV.
Contact Philips TV Consumer Care to have the TV • NEVER place a television set in an unstable location. checked before use. • NEVER place the television set on tall furniture (for •...
TP Vision is the warrantor in relation to the During lightning storms, never touch any part of the TV with which this booklet was packaged. Philips and TV, power cord or antenna cable. the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
Page 58
This LCD/LED product has a high number of colour pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.
16.4 Other Trademarks Copyrights All other registered and unregistered trademarks are 16.1 the property of their respective owners. HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Source: http://www.denx.de/wiki/U-Boot Open Source vmlinux (3.1.10) 17.1 linux kernel Open Source Software Source: http://git.kernel.org/cgit/linux/kernel/git/stable/linux- This television contains open source software. TP stable.git Vision Europe B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source busybox (v1.23.2) software packages used in this product for which such offer is requested by the respective licences.
Page 61
freetype (2.5.3) openssl-0.9.8 (1.0.0) FreeType is a freely available software library to OpenSSL is a robust, commercial-grade, and full- render fonts. featured toolkit for the Transport Layer Security (TLS) and Secure Sockets Layer (SSL) protocols. Source: http://www.freetype.org/license.html Source: http://www.openssl.org/source/license.html libc (2.16) sqlite (3.7.11) The GNU C Library is used as the C library in the GNU systems and most systems with the Linux kernel.
Page 62
icu (4.2.1) ICU is a mature, widely used set of C/C++ and Java libraries providing Unicode and Globalization support for software applications. Source: http://site.icu-project.org/home pixman (0.19.6) Pixman is a low-level software library for pixel manipulation, providing features such as image compositing and trapezoid rasterization.
On-line User Manual 3 CI Card 19 Optical 16 Colour 41 Colour Enhancement 41 Colour Settings 41 Philips Support 3 Colour Temperature 41 Picture Clean 42 Computer Connection 18 Picture Contrast Mode 41 Computer Picture Setting 41 Picture Format 42...
Page 64
Speakers or Headphones 46 Standby Mode 11 Subtitle Language 45 Super Resolution 42 Surround Sound 43 Switching On 11 Teletext 31 Text 31 Text Language 45 Time 45 Time Settings 45 Time Zone 45 Troubleshooting 53 TV placement 8 Universal Access 46 Update Satellite Channels 26 Update Software 4 Update Software - Local Updates 4...