Connecting To A Paired Computer (Windows 7) - Sony WI-C600N Help Manual

Help Guide
Wireless Noise Canceling Stereo Headset
WI-C600N

Connecting to a paired computer (Windows 7)

Before starting the operation, make sure of the following:
Depending on the computer you are using, the built-in Bluetooth adapter may need to be turned on. If you do not
know how to turn on the Bluetooth adapter or are unsure if your computer has a built-in Bluetooth adapter, refer to
the operating instructions supplied with the computer.
Wake the computer up from sleep mode.
1
Turn on the headset.
2
Press and hold the
Check that the indicator continues to flash blue after you release your finger from the button. You hear the voice
guidance "Power on".
After the headset turns on, if it has automatically connected to the last connected device, you will hear a voice
guidance "Bluetooth connected".
Use the computer to check whether the connection is established, and if it is not established, proceed to step 3.
If the computer has connected to the last Bluetooth device connected, disconnect it, then proceed to the next step.
Select the headset using the computer.
3
Click the [Start] button, then [Devices and Printers].
1.
Double-click [WI-C600N] of [Devices].
2.
button for about 2 seconds.
60