D-Link DWA-192 Quick Installation Manual

Wireless AC1900 Dual Band USB 3.0 Adapter
Беспроводной двухдиапазонный USB 3.0 адаптер AC1900
с поддержкой MU-MIMO
Бездротовий дводіапазонний USB 3.0 адаптер AC1900
з підтримкою MU-MIMO
MU-MIMO қолдаумен сымсыз екі диапазонды
USB 3.0 AC1900 адаптер
DWA-192
Quick Installation Guide
Краткое руководство по установке
Короткий посiбник зi встановлення
Орнату бойынша қысқаша нұсқаулық
PACKAGE CONTENTS
- DWA-192 Wireless USB Adapter
- USB 3.0 Cradle with Cable
- Quick Installation Guide
If any of these items are missing from your packaging, please contact
your reseller.
INSTALLATION
1. Download the required driver on the DWA-192 description page from the
www.dlink.com website.
2. Insert the DWA-192 into any available USB port of your powered on PC.
Use the included USB 3.0 cradle with cable if necessary.
3. If the "Driver Software Installation" dialog box appears, press "Cancel" /
"Close".
4. Open a folder with the required driver and run the "setup.exe" file to
install the driver.
SETUP AND CONFIGURATION PROBLEMS
1. What should I do, if I've forgotten my wireless encryption key?
The wireless encryption key is configured at the Wireless Access Point or
Router. If you are unable to obtain your encryption key, the only solution
would be to reconfigure your Access Point/Router to use a new encryption
key. Please contact your Wireless Access Point/Router manufacturer.
2. Why can't I get a wireless connection?
- Check that your DWA-192 is plugged in properly to the USB port or try
to plug the DWA-192 into another USB port if it is available.
- The LED on the DWA-192 should be lit, otherwise there could be a
physical fault on the USB port or the driver is not installed properly.
- Ensure that the wireless settings on the DWA-192 match the settings on
your Access Point/Router. Please check and confirm your settings for
Wireless Network Name (SSID)
Wireless Encryption Key
Wireless Security Method (e.g. WEP, WPA2)
to check whether a Wireless connection has been made, in the Windows
System Tray (bottom right).
- Check that your Internet is working fine on existing computers.
- Ensure that you have followed and completed the software installation
process, otherwise, please reinstall the software. The LED on the
DWA-192 should come on after software installation.
1
ENGLISH