Product Setup - D-Link DUB-2312 Quick Installation Manual

PRODUCT SETUP

Step 1:
Plug the DUB-2312's USB cable into an available
USB Type-C on your computer.
Step 2:
Run the setup file in the opened folder to begin the DUB-2312 driver installation.
Note: If the folder containing the setup file is not opened automatically, please open it
through a file manager and run the setup file.
Step 3:
Attach an Ethernet cable to the Ethernet port on the
DUB-2312 and to your network switch, hub or router.
Installation complete
When the installation of the DUB-2312 is complete, the 1G LED will flash green when the
DUB-2312 is connected to a 1000 Mbps network. The 100M LED will flash green when the DUB-2312
is connected to a 100 Mbps network. If both LEDs are unlit, there may be a problem with the physical
connection. Check the cables between your DUB-2312, the computer, and the network. Verify that
your network switch, hub, or router is powered on.
1G LED
Flashes green when
the network connection is at
1000 Mbps.
3
100M LED
Flashes green when
the network connection is at
100 Mbps.
Power LED
Lights up solid green when
the network adapter is
connected to a U SB port.
DUB-2312