8.4 Dismantling the trimmer guard - LiC
1
Loosen the screws (A 4x) and lift off the motor
cover (B).
See figure 7
2
Slide the trimmer guard (C) up the shaft.
Separate the contact (E). Loosen the screw
(D) and lift off the motor housing/trimmer head.
Slide off the trimmer guard (C) from the shaft.
See figure 8
Cleaning and inspection
Clean and check carefully all components. Parts
must be replaced if cracked or showing signs of
other defects. Always use original spare parts.
See figure 9
B
A
Fig 7
C
Fig 8
Fig 9
Safety equipment
D
E
– 35
English