Installation Requirements; Location Requirements; Product Dimensions; Built-In Outdoor Grill Enclosure - KitchenAid 740-0004 Installation Instructions And Use & Care Manual

Location Requirements

Select a location that provides minimum exposure to wind and
traffic paths. The location should be away from strong draft
areas.
Do not obstruct flow of combustion and ventilation air.
Clearance to combustible construction for grill:
◼
A minimum of 91.44 cm (36") must be maintained between
the front of the grill hood, sides and back of the grill and
any combustible construction.
◼
A 91.44 cm (36") minimum clearance must also be
maintained below the cooking surface, and the grill shall
not be used under overhead combustible construction.
Rotisserie (accessory is not included)*
If you equip your grill with a rotisserie, a 15.2 cm (6") minimum
clearance is needed for the rotisserie motor.
A grounded, 3-prong outlet located to the left of the grill is
required.
*See "Assistance" section to order.

INSTALLATION REQUIREMENTS

Product Dimensions

Built-In Outdoor Grill Enclosure

The enclosure for the built-in outdoor grill is to be a minimum of
66.0 cm (26.0") high x 52.1 cm (20.5") deep x 43.2 cm (17.0")
wide.
This built-in outdoor grill is only for installation in a built-in
enclosure constructed only of noncombustible materials. Non-
combustible materials could be brick, firewall or steel. Do not
use wood or other combustible materials for built-in enclosure.
5