Table of Contents
Advertisement
Bosch Rexroth AG
Standards
Standard
IEC 60721-3-2
IEC 60721-3-3
Tab. 8-1: Standards used
8.1 CE marking
The electronic products described in the present operating instructions comply
with the requirements and the target of the following EU directive and with the
following harmonized European standards:
EMC directive 2014/30/EC
The electronic products described in the present operating instructions are
intended for use in industrial environments and comply with the following
requirements:
Standard
IEC 61000-6-2
IEC 61000-6-4
Tab. 8-2: Standards for electromagnetic compatibility (EMC)
Loss of CE conformity due to modifications at the device
CE marking applies only to the device upon delivery. After modifying
the device, verify the CE conformity.
8.2 UL/CSA certified
The devices are certified acc. to
12/87
Title
Classification of environmental conditions
Part 3: Classification of groups of environmental parameters and their
severities
Section 2: Transportation
Classification of environmental conditions
Part 3: Classification of groups of environmental parameters and their
severities
Section 3: Stationary use at weather-protected locations
Title
Electromagnetic compatibility (EMC) –
Part 6-2: Generic standards – Immunity for industrial
environments
Electromagnetic compatibility (EMC) –
Part 6-4: Generic standards – Emission standard for
industrial environments
IndraControl VPB 40.4
DOK-MLC***-INDRACTRLV4-IT02-EN-P
Hide quick links:
Advertisement
Table of Contents
