Table of Contents
Advertisement
10 Measurements and Adjustments
10.1. Matrix Chart for Replaced Part and Necessary Adjustment
The relation between Replaced part and Necessary Adjustment is shown in the following table.
When concerned part is replaced, be sure to achieve the necessary adjustment(s).
As for Adjustment condition/procedure, consult the "Adjustment Manual" which is available in Adjustment software.
The Adjustment software is available at "TSN Website", therefore, access to "TSN Website" at "Support Information from NWBG/
VDBG-AVC".
NOTE:
After adjustments have been terminated, make sure to achieve "INITIAL SETTINGS".
Adjustment Item
Camera
ISO sensitivity adjustment
Body
(ISO)
Section
High brightness coloration
(SEN)
AWB adjustment
(WBM/WBH)
IMAGE SENSOR white scratch compensation
(WKI)
IMAGE SENSOR black scratch compensation
(BKI)
EYE SENSOR adjustment
(EYE)
Mount Box Adjustment data writing
Lens
Resolution inspection
With
(*1)
Body
NOTE: (*1)
It is carried out, not only replacing the part(s)/component, but also to support customer requirement to check total performance
of the DMC-G1K in case of any mishandling, dropping or others.
NOTE: (*2)
Before replacing the MAIN PCB, proceed the EEPROM data backup from the unit.
After replacing the MAIN PCB, overwrite the EEPROM data with backup data from the unit before proceeding the adjustment /
inspection.
NOTE: (*3)
After replacing the MOUNT BOX BLOCK, the mount box data has to be stored to the unit, before proceeding the adjustment /
inspection.
For more details, consult the adjustment instruction which is available together with the Maintenance software at "software
download" on the "Support Information from NWBG/VDBG-AVC" web-site in "TSN system".
*.There is no LCD / LVF adjustment in this model.
Mount Box
Main P.C.B.
Eye sensor Flash P.C.B.
(*3)
(*2)
O
O
O
O
O
O
O
O
O
O
-
O
O
-
O
-
54
Replaced Part
LCD/
LVF U
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
O
-
-
-
-
-
-
-
-
Lens U/
L-Mount/
Rear Frame
-
-
-
-
-
-
-
O
Advertisement
Chapters
Table of Contents
