Advertisement
English
For your child's safety and health
WARNING!
- Keep the cap away from children to avoid
suffocation.
- Always use this product with adult supervision.
- Never use feeding teats as a soother, to prevent
choking hazard.
- Continuous and prolonged sucking of fluids will
cause tooth decay.
- Always check food temperature before feeding.
- It is not recommended to use a microwave to
warm up baby's food or drinks. Microwaves
might alter the quality of food/drinks and
destroy some valuable nutrients and may
produce localized high temperatures. Therefore,
take extra care if and when you heat up food in
a microwave.When heating up liquid or food in
the microwave, only place the container without
screw ring, AirFree™ vent insert, teat and cap.
Always stir heated food to ensure even heat
distribution and check the temperature before
serving.
- Keep all components not in use out of the
reach of children.
- Do not allow child to play with small parts or
walk/run while using bottles or cups.
- Do not place in a heated oven.
- Drinks other than milk and water, such as fruit
juices and flavored sugary drinks are not
recommended. If used, they should be well
diluted and only used for limited periods, not
constantly sipped.
- Expressed breast milk can be stored in
sterilized Philips Avent bottles/containers in the
refrigerator for up to 48 hours (not in the door)
or in the freezer for up to 3 months. Never
refreeze breast milk or add fresh breast milk to
already frozen milk.
- Always discard any breast milk that is left over
at the end of a feed.
- Do not use abrasive cleaning agents or anti-
bacterial cleaners. Do not place components
directly on surfaces that have been cleaned
with anti-bacterial cleaners.
- Plastic material properties may be affected by
sterilizing and high temperatures. This can
affect the fit of the cap.
- Inspect the feeding teat before use and pull the
feeding teat in all directions.
- Throw away any part at the first signs of
damage or weakness.
- Do not alter the product or parts of it in any
way. This may result in unsafe functioning of the
product.
AirFree™ vent insert
Benefit: The AirFree™ vent insert keeps the teat full
of milk during feeding, even while the bottle is held
horizontally. This supports an upright feeding
position for your baby in order to reduce air
ingestion. This helps reduce common feeding
issues including wind and reflux (GER).
Assembly: Place the AirFree™ vent insert in the
bottle before you assemble the screw ring with
teat.
Warning: When you prepare formula, make sure
that all the formula is fully dissolved to avoid
blocking the AirFree™ vent insert.
Note: Always make sure the teat is full of milk by
turning the bottle upside down before feeding
your baby. While feeding, make sure that the
AirFree™ vent insert points upwards, in line with
your baby's nose (see image).
Compatibility: The AirFree™ vent insert only works
with 4 oz/125 ml, 9 oz/260 ml and 11 oz/330 ml
Philips Avent Anti-colic bottle and Classic+ bottles,
teat and screw ring. The AirFree™ vent insert is not
compatible with the (I/II/III) variable flow teat and
the Natural bottle range.
Note: When using an 11 oz/330 ml bottle, the
AirFree™ vent insert insert will keep the teat full of
milk but it could be that you see fewer air bubbles.
Philips Avent Anti-colic bottles and Classic+
bottles can also be used without the AirFree™ vent
insert.
Before first and every use
Disassemble all parts and clean them in warm
soapy water and rinse them thoroughly. Sterilize
the parts in boiling water for 5 minutes or by using
Advertisement
