Leds In The Buttons - Miele PG 8581 Operating Instructions Manual

LEDs in the buttons

The buttons on the control panel have LEDs. These indicate the status of the machine.
Button
Button 
Program
selection
buttons ,
 and 
Button 
Button 
Start/Stop
button
Button 
LED Status
ON The machine is switched on.
FLASHES The machine is ready for use.
OFF The machine is switched off.
ON The respective program has been selected. At the
end of the program the LED will remain lit until a
different program is selected.
OFF The program is not selected or the program settings
are being changed.
ON A program has been selected from the program list.
At the end of the program the LED will remain lit until
a different program is selected.
OFF No program has been selected from the list or the
program settings are being changed.
ON The additional "Drying Assistance" function has been
activated for the selected program (not available for
all programs; see "Program chart").
OFF The additional "Drying Assistance" function has been
deactivated.
ON A program is running.
FLASHES A program has been selected, but not yet started.
GREEN
FLASHES RED A fault has occurred (see "Problem solving guide").
OFF A program has finished.
ON The door is closed (locked) and there is no program
running.
FLASHES A program has finished and the door is closed
(locked).
OFF A program is running or the door is open (unlocked).
Guide to the machine
11