Yamaha DTX-MULTI 12 Firmware Update Manual page 4

Main Enhancements
【V1.03 → V1.10】
・ Added new pad types for the DT50S/DT50K and KP100. (101 page of Owner's Manual)
・ Added the new trigger parameter "NoiseFilterTable."
・ Added the new trigger parameter "2P Balance."
Added new setting values "14&15" and "16&17" for Copy Trigger parameters "Pad to copy" and "Pad
・
to replace." (104 page of Owner's Manual)
■Version History
【V1.02 → V1.03】
・ Added "ph2" setting for ClkOutSel (Click-track output selection) parameter. (84 page of Owner's
Manual) This setting is used to output the click-track via the PHONES jack only, and all other sound
via the OUTPUT (L/MONO and R) jacks only.
・ Added new pad types as follows. (101 page of Owner's Manual)
KU100, TP70S Snare, TP70S Tom, TP70S HiHat, TP70, PCY100, PCY90, XP80 Snare, XP80Tom,
XP70
・ Expanded the input gain setting range. (101 page of Owner's Manual)
【V1.01 → V1.02】
・ Fixed a bug where, when two HH65 Hi-hat Controllers connected to the FOOT SW and HH CTRL
jacks were simultaneously operated, a sound would be produced only for one of them.
【V1.00 → V1.01】
・ Added new pad types for external pads as follows.
New Pad Type
KP125W/125
XP120/100Sn
XP120/100Tm
・ Fixed a problem in which the DTX-MULTI 12 may freeze along with the loss of currently recorded data,
when the recording operation uses up the full memory for User patterns.
・ Solved some minor errors.
Model
KP125W/125
XP120SD/100SD
XP120T/100T
DTX-MULTI 12 Firmware Update Guide
Manual Development Group
©2016 Yamaha Corporation
Published 07/2016 YJ-A0
4