Related Manuals for HIKVISION IDS-TCM403-AI/0832
Summary of Contents for HIKVISION IDS-TCM403-AI/0832
- Page 1 Network Traffic Camera • User Manual Network Traffic Camera (for Smart Monitoring) User Manual...
- Page 2 The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (http://www.hikvision.com).
- Page 3 Network Traffic Camera • User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
- Page 4 Network Traffic Camera • User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
- Page 5 Network Traffic Camera • User Manual To avoid heat accumulation, good ventilation is required for a proper operating environment. Store the device in dry, well-ventilated, corrosive-gas-free, no direct sunlight, and no heating source environment. Avoid fire, water, and explosive environment when using the device. ...
-
Page 6: Table Of Contents
Network Traffic Camera • User Manual TABLE OF CONTENTS Chapter 1 Network Connection ...................... 7 Wiring over the LAN ......................7 Activate the Camera ......................8 Activation via Web Browser ..................8 Activation via SADP Software ..................9 Chapter 2 Login..........................11 Chapter 3 Live View ........................ - Page 7 Network Traffic Camera • User Manual Configure ICR ........................48 Chapter 11 Entrances and Exits Configuration ................50 Configure White-Black List ....................50 Configure Entrance and Exit ..................... 53 Chapter 12 Application Mode Configuration ................56 Smart Mode ........................56 License Plate Recognition System ..................
-
Page 8: Chapter 1 Network Connection
Network Traffic Camera • User Manual Chapter 1 Network Connection You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection. If the product does not work properly, please contact with your dealer or the nearest service center. -
Page 9: Activate The Camera
Network Traffic Camera • User Manual Switch Traffic Camera Computer Connecting via a Switch or a Router Activate the Camera You are required to activate the camera first by setting a strong password for it before you can use the camera. Activation via Web Browser and Activation via SADP Software are supported. -
Page 10: Activation Via Sadp Software
Network Traffic Camera • User Manual Create a password and input the password into the password field. STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. - Page 11 Network Traffic Camera • User Manual STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.
-
Page 12: Chapter 2 Login
Network Traffic Camera • User Manual Chapter 2 Login Open the web browser. In the browser address bar, input the IP address of the camera, and press the Enter key to enter the login interface. Input User Name and Password. Click Login. -
Page 13: Chapter 3 Live View
Network Traffic Camera • User Manual Chapter 3 Live View Live View Page Purpose: The live view page allows you to view the real-time video and capture images. Log in the camera to enter the live view page, or you can click Live View on the menu bar of the main page to enter the live view page. -
Page 14: Start Live View
Network Traffic Camera • User Manual Descriptions of Live View Icons Icon Description Start/Stop live view. The window size is 4:3. The window size is 16:9. The original widow size. Self-adaptive window size. Live view with the main stream. If the network is in good condition, select main stream. -
Page 15: Record And Capture Pictures Manually
Network Traffic Camera • User Manual Record and Capture Pictures Manually On the live view page, click “ ” on the toolbar to capture the live pictures or click “ ” to start recording. The saving paths of the captured pictures and recorded videos can be set on the Configuration >... - Page 16 Network Traffic Camera • User Manual Level 2 Arming is recommended for debugging. Because when the device is running, Level 1 Arming cannot be activated. Measuring License Plate: Measure the pixel of the captured license plate. You can click Closing Measurement to disable the function.
-
Page 17: Traffic Statistics
Network Traffic Camera • User Manual Set Continuous Capture Parameters Lane No.: The lane where the vehicle is captured. Waiting Time: Delay time from capture order had been delivered to vehicle to vehicle has been actually captured. Capture Times: Number of captured pictures. ... -
Page 18: Chapter 4 Picture Search
Network Traffic Camera • User Manual Chapter 4 Picture Search Purpose: The captured picture of all types, including normal, overspeed, wrong-way driving, etc., can be searched from this page. You can also export the pictures to the PC local directory. Before you start: Please insert a TF card with up to 128 GB storage in the camera for picture storage. -
Page 19: Chapter 5 Local Configuration
Network Traffic Camera • User Manual Chapter 5 Local Configuration Purpose: The local configuration refers to the parameters of the live view, record files and captured pictures. The record files and captured pictures are the ones you record and capture using the web browser and thus the saving paths of them are on the PC running the browser. - Page 20 Network Traffic Camera • User Manual − Record File Size: Select the packed size of the manually recorded and downloaded video files. After the selection, the maximum record file size is the value you selected. − Save record files to: Set the saving path for the manually recorded video files. ...
-
Page 21: Chapter 6 System Configuration
Network Traffic Camera • User Manual Chapter 6 System Configuration Purpose: You can configure the parameters on this page, including device information, serial ports, network parameters, time configuration, service, etc. View Device Information Go to Configuration > Device Configuration > System Configuration > Device Information. ... -
Page 22: Configure Installation Parameters
Network Traffic Camera • User Manual Device Information Configure Installation Parameters You can set the installation parameters of the camera. Go to Configuration > Device Configuration > System Configuration > Installation Parameters. -
Page 23: Configure Serial Ports
Network Traffic Camera • User Manual Installation Parameters Set the installation parameters according to the actual conditions. Click Save to save the settings. Configure Serial Ports Purpose: Configure the RS-485 parameters and RS-232 parameters in this page. The RS-485 ports are used to input signals related to traffic control, such as RS-485 radar and vehicle detector. -
Page 24: Configure Network Parameters
Network Traffic Camera • User Manual Serial Ports Settings Configure the RS-485 and RS-232 parameters. Click Save to save the settings. Configure Network Parameters Purpose: Network parameters settings must be properly configured before you operate the camera over network. The camera supports both the IPv4 and IPv6. Both versions can be configured simultaneously without conflicting to each other, and at least one IP version should be configured. - Page 25 Network Traffic Camera • User Manual TCP/IP Settings Configure the basic network settings, including the NIC Type, IPv4 or IPv6 Address, IPv4 or IPv6 Subnet Mask, IPv4 or IPv6 Default Gateway, IPv6 mode, Mac Address, MTU settings and Multicast Address. ...
-
Page 26: Configure Port
Network Traffic Camera • User Manual Click Save to save the above settings. The valid value range of MTU is 1280 to 1500. The Multicast sends a stream to the multicast group address and allows multiple clients to acquire the stream at the same time by requesting a copy from the multicast group address. - Page 27 Network Traffic Camera • User Manual Example If you set the port number as 443 and the IP address is 192.168.1.64, you may access the device by inputting https://192.168.1.64:443 via the web browser. The HTTPS port can be only configured through the web browser. Go to Configuration >...
-
Page 28: Configure Time
Network Traffic Camera • User Manual 2) Click View to find the saving path of the certificate. 3) Click Install to install the certificate. OPTION 3: Create the certificate request first and continue the installation. 1) Click Create the certificate request first and continue the installation. 2) Click Create to create the certificate request. - Page 29 Network Traffic Camera • User Manual Manual Synchronization (Optional) you can also check Synchronize with PC. The camera time is synchronized with the time of your computer. Click Save to save the settings. NTP Synchronization Select Synchronization Mode as NTP Synchronization. NTP Synchronization Configure the following settings: ...
-
Page 30: Enable User Lock
Network Traffic Camera • User Manual If the camera is connected to a public network, you should use a NTP server that has a time synchronization function, such as the server at the National Time Center (IP Address: 210.72.145.44). If the camera is set in a customized network, NTP software can be used to establish a NTP server for time synchronization. -
Page 31: Chapter 7 Encoding And Storage Configuration
Network Traffic Camera • User Manual Chapter 7 Encoding and Storage Configuration Purpose: You can configure the encoding and storage related parameters from this page, including video encoding, image encoding, ROI, record schedule, redundant storage, FTP, and cloud storage. Configure Video Encoding For certain camera models, you can configure parameters for available video streams, for example, the main stream, the sub-stream, etc. - Page 32 Network Traffic Camera • User Manual The main stream is usually for recording and live view with good bandwidth, and the sub-stream can be used for live view when the bandwidth is limited. You can customize the following parameters for the selected stream type. ...
-
Page 33: Configure Image Encoding
Network Traffic Camera • User Manual The video parameters vary according to different camera models. Refer to the actual display page for camera functions. Configure Image Encoding Go to Configuration >Device Configuration > Encoding and Storage > Image Encoding. Image Encoding Select Capture Resolution. -
Page 34: Configure Record Schedule
Network Traffic Camera • User Manual Region of Interest Settings Enter the ROI settings interface: Configuration > Device Configuration > Encoding and Storage > ROI. Select the Stream Type for ROI. Check the checkbox of Enable under Fixed Area. Set Fixed Area for ROI. 1) Select the Area Code from the drop-down list. - Page 35 Network Traffic Camera • User Manual You can follow the instructions to configure the scheduled recording. By default, the record files of scheduled recording are stored in the TF card. Steps: Go to Configuration > Device Configuration > Encoding and Storage > Record Schedule. Record Schedule Configuration Select Record Stream.
-
Page 36: Configure Storage Management
Network Traffic Camera • User Manual Edit Record Schedule Select the day to set the record schedule. Set all-day record or segment record. If you want to configure the all-day recording, check the All Day checkbox. If you want to record in different time sections, check the Customize checkbox. Set the Start Time and End Time. -
Page 37: Configure Ftp
Network Traffic Camera • User Manual Redundant Storage Configuration View the HDD information such as Capacity, Free Space, Status, etc. (Optional) Check the HDD and click Format to format it. (Optional) Check Auto-Initialize Redundant Storage. Then the TF card in the redundant storage can be formatted automatically. - Page 38 Network Traffic Camera • User Manual Go to Configuration > Device Configuration > Encoding and Storage > FTP. FTP Configurations Check Upload Additional Information to FTP to enable the uploading function. If Upload Additional Information to FTP is enabled, the additional information of passed vehicle will be uploaded to FTP in binary form.
- Page 39 Network Traffic Camera • User Manual Configure the Name Rule. 1) Select the Separator. 2) Select the Elements of each name. Name Rule Configuration Configure the OSD Information to set file name as required. OSD Information Click Save to save the settings.
-
Page 40: Chapter 8 Text Overlay Configuration
Network Traffic Camera • User Manual Chapter 8 Text Overlay Configuration Purpose: Configure the OSD on the captured pictures and videos. Configure Single Picture Overlay Purpose: You can configure the overlay information of the captured picture. Steps: Go to Configuration > Device Configuration > Text Overlay > Single Picture Overlay. Single Picture Overlay Check Capture Picture Overlay. - Page 41 Network Traffic Camera • User Manual Overlay on Picture: Display the information on the picture. Overlay on Picture Overlay Above the Picture: Display the information on the top. Overlay Above the Picture Overlay Below the Picture: Display the information on the bottom.
- Page 42 Network Traffic Camera • User Manual Overlay Below the Picture (Optional) Check Overlay Number Zeroing, to zero out the overlaid information. (Optional) Check Overlay Plate Close-up on the captured picture. Configure the overlay information. Configure Display Information 1) Check the overlay information or check Select All to display all the overlay information.
-
Page 43: Configure Video Overlay
Network Traffic Camera • User Manual Configure Video Overlay Purpose: You can configure the overlay information of the captured picture. Go to Configuration > Device Configuration > Text Overlay > Video. Capture Overlay Configuration Configure the parameters below. OSD Properties: the OSD information properties overlaid on the picture. ... -
Page 44: Chapter 9 Capture Parameters Configuration
Network Traffic Camera • User Manual Chapter 9 Capture Parameters Configuration Purpose: You can configure capture parameters before capturing, and edit capture parameters when the default capture parameters cannot meet actual needs. Configure Flash Light Parameters Go to Configuration > Device Configuration > Capture Parameters > Flash Light Parameters. Select a tab corresponded with the flash light control port. -
Page 45: Configure Vehicle Feature
Network Traffic Camera • User Manual Port number may vary from different devices. Please refer to actual device. Click Save to save the settings. Configure Vehicle Feature Go to Configuration> Device Configuration > Capture Parameters > Vehicle Feature. Vehicle Feature Configuration Check Vehicle Features types. -
Page 46: Chapter 10 Image Parameters Configuration
Network Traffic Camera • User Manual Chapter 10 Image Parameters Configuration Purpose: Configure general parameters, video parameters, picture parameters and ICR on this page. Configure General Parameters Purpose: General parameters refer to the image parameters applying to both video image and capture image, such as saturation, sensitivity, lens type, sharpness, white balance, gamma correction, and brightness enhancement. -
Page 47: Configure Video
Network Traffic Camera • User Manual Brightness: Active WDR function automatically. Set the brightness threshold. WDR Level: higher level means stronger effect. Select Iris Mode. Auto and Manual are selectable. Adjust Brightness Enhancement at Night. It ranges from 0 to 100. (Optional) Check Enable Defog. - Page 48 Network Traffic Camera • User Manual Video Image Configuration Adjust Brightness [0 to100]. Adjust Contrast [0 to 100]. It refers to the color contrast between the brightest part and darkest part. Enter Shutter Speed [120 to 40000 μs]. It refers to the length of time that a camera's shutter remains open.
-
Page 49: Configure Picture
Network Traffic Camera • User Manual Configure Picture Purpose: The camera supports dual-shutter. One shutter for video image and the other one for captured image. You can configure shutter parameters for captured image. Go to Configuration > Device Configuration > Image Parameters > Picture. Captured Image Configuration Check Enable License Plate Enhancement. - Page 50 Network Traffic Camera • User Manual Select ICR Mode. Do not Switch, Auto-switch, Manual Switch, and Scheduled Switch are selectable. Do not switch: The ICR always stays in day mode by default. Auto Switch: The ICR switches according to the brightness. Adjust Threshold from 0 to 100. Auto-Switch ...
-
Page 51: Chapter 11 Entrances And Exits Configuration
Network Traffic Camera • User Manual Chapter 11 Entrances and Exits Configuration Configure White-Black List Purpose: You can configure the vehicle whitelist and blacklist, and import, export, add, edit, delete, or search the list. Before you start: Make sure the TF card is installed for the camera and can work normally. The whitelist and blacklist function can be used normally only after the TF card is installed and works normally. - Page 52 Network Traffic Camera • User Manual Import Whitelist and Blacklist 2) Click Download Template to download the list template. 3) Edit the whitelist and blacklist information according to the template and save it locally. You must edit the whitelist and blacklist information according to the template, or the import will fail.
- Page 53 Network Traffic Camera • User Manual 1) Click Add and the window pops up as below. Add Whitelist/Blacklist Vehicle Information 2) Edit the vehicle information and time. 3) Click OK to add it and it will be listed on the table. Edit the added whitelist/blacklist vehicle information.
-
Page 54: Configure Entrance And Exit
Network Traffic Camera • User Manual 2) Click Search to search the vehicle information and the search result will be listed on the table. Search Vehicle Information Delete the whitelist/blacklist vehicle information. 1) Configure the type and keywords. License Plate No.: Enter the complete license plate number in the Keywords text field. ... - Page 55 Network Traffic Camera • User Manual Entrance and Exit Configuration Select Control Mode. By Camera is available. Configure Relay to control the barrier gate. You can select Open, Close, or N/A for the relay function. Relay 1 connects 1A and 1B of barrier gate, and Relay 2 connects 2A and 2B of barrier gate.
- Page 56 Network Traffic Camera • User Manual Entrance and exit can only apply to License Plate Recognition System Mode.
-
Page 57: Chapter 12 Application Mode Configuration
Network Traffic Camera • User Manual Chapter 12 Application Mode Configuration Purpose: This chapter introduces the parameters configuration under different trigger mode. The supported trigger modes vary according to the camera models. Smart Mode In this mode, target capture and license plate recognition are triggered by internal live video analysis. -
Page 58: License Plate Recognition System
Network Traffic Camera • User Manual 2) (3 lanes for instance) Adjust the position and length of Lane Line 1, Lane Line 2, Lane Line 3, and Lane Right Border Line according to actual lanes. Draw LPR Area 3) Click OK to save the drawing. Set Lane Direction and Linked Lane No. - Page 59 Network Traffic Camera • User Manual Video Detection 1) Select Picture Mode. Scene Picture and Scene Picture + Close-up Picture are selectable. 2) (Optional) Check Capture Plate Absence Vehicle to capture the vehicle without license plate. 3) Select Capture Mode. Strobe Light Mode is selectable. 4) Enter the Linked Lane No.
- Page 60 Network Traffic Camera • User Manual 4) Select I/O No. When the coil detects that there is vehicle passing, a rising or falling edge signal is sent to the linked I/O of the capture unit to trigger capture. The I/O Trigger Default Status and linked I/O No. should be configured according to the actual conditions.
- Page 61 Network Traffic Camera • User Manual Draw Rules Line 4) Click OK to save the drawing. (Optional) Click Get Recommended Value to get the recommended value of the parameters. Click Save to save the settings.
-
Page 62: Chapter 13 Exception
Network Traffic Camera • User Manual Chapter 13 Exception Purpose: The exception type can be HDD error, network disconnected, IP address conflicted, and vehicle detector exception. Go to Configuration > Device Configuration> Exception. Select the exception type and the corresponding trigger methods. Exception Settings ... -
Page 63: Chapter 14 Maintenance
Network Traffic Camera • User Manual Chapter 14 Maintenance Device Status Go to Configuration > Device Status. Device Status View Device IP Address and Device Status. Device IP Address: Display the current IP address of the camera. Device Status: Detailed descriptions are shown in the following table. Description of Device Status Item Description... -
Page 64: Add A User
Network Traffic Camera • User Manual User Management Add a User The admin user has all permissions by default and can create/modify/delete other accounts. The admin user cannot be deleted and you can only change the admin password. Click Add to add a user. Select User Type. -
Page 65: Modify A User
Network Traffic Camera • User Manual Add a User Modify a User Select a user from the list and click Edit. Modify the editable parameters. Modify Admin... -
Page 66: Delete A User
Network Traffic Camera • User Manual Modify Operator/User Click OK to save the settings. Delete a User Select the user you want to delete and click Delete. Click OK on the pop-up message box to delete the user. Log Search Purpose: The operation, alarm, exception and information of the camera can be stored in log files. -
Page 67: Reboot The Camera
Network Traffic Camera • User Manual Log Searching Set the log search conditions to specify the search, including Major Type, Minor Type, Start Time, and End Time. Click Search to search log files. The matched log files will be displayed in the list. To export the log files, click Save Log to save the log files in your PC. -
Page 68: Export Debug File
Network Traffic Camera • User Manual Use the Hard Reset function with caution. Export Debug File Go to Configuration > Device Configuration> Maintenance > Debug File Export. Export Debug File Click Debug File Export and set the saving path to save the debug file in local storage. Export Configuration File Purpose: If you have configured a camera and want to use the configured parameters as the example for... -
Page 69: Upgrade The System
Network Traffic Camera • User Manual (Optional) For Partial Import mode, you should select configuration type(s) to import by checking the corresponding checkbox(s). Click Browse to select the saved configuration file. Click Import to start importing the configuration file. You need to reboot the camera after importing configuration file. Upgrade the System Go to Configuration >... - Page 70 UD17210B...