Installing User Software; Installing User Software On A Windows Computer; Install User Software On A Windows Computer From Media - Canon imagePRESS Server В5000 Manual

Installing user software

You can install imagePRESS Server user software on Windows and Mac OS computers.
Install user software in one of the following ways:
•
From the User Software DVD
•
From the imagePRESS Server, using the Internet or intranet
•
From the imagePRESS Server directly, over the network
If earlier versions of imagePRESS Server user software are installed on your computer, the installer allows you to
uninstall those applications before installing new software.
Note: When you upgrade user software, use the Fiery User Software Installer and follow the instructions by selecting
Modify.
For more information, see
If you do want to uninstall an earlier version of user software, you may want to back up your settings. Back up and
restore of imagePRESS Server resources and settings is available from Command WorkStation. For more
information, see Configuration and Setup and Command WorkStation Help.
After first-time installation of imagePRESS Server user software, updates are managed by the Fiery Software
Manager application. For information, see
Note: Before installing imagePRESS Server user software, you must disconnect any measurement instrument from
the computer. Otherwise, after installation the instrument may not be recognized by the software.
Note: Fiery JobMaster is distributed by EFI. Canon does not distribute the option.

Installing user software on a Windows computer

All installation of user software on a Windows computer is done with the Fiery User Software Installer.
Before installing the software, ensure that your computer meets the minimum system requirements. For system
requirements, see Configuration and Setup.
The only applications that are not installed by the Fiery User Software Installer are Adobe Acrobat and Enfocus
PitStop, for use with Fiery Impose/JobMaster/Compose. For more information, see
page 23.
Note: Fiery JobMaster is distributed by EFI. Canon does not distribute the option.
Procedures describe installing from the User Software DVD, over the network, or over the Internet, and also
modifying the user software.
Modify user software from media
Using Fiery Software Manager
on page 10.
on page 13.
Fiery make-ready applications
Utilities
Installing user software
on
9