4B: Connecting The Video Components - Sony HT-7200DH Operating Instructions Manual

4b: Connecting the video components

How to hook up your
components
This section describes how to hook up your
components to this receiver. Before you begin,
refer to "Component to be connected" below
for the pages which describe how to connect
each component.
Before connecting the cords, be sure to
disconnect the AC power cord.
After hooking up all your components,
proceed to "5: Connecting the antennas" (page
27).
Component to be connected
Component
TV
With HDMI jack
DVD player
Satellite tuner/Set-top box
DVD recorder, VCR
Camcorder, video game, etc.
If you want to connect several
digital components, but cannot
find an unused input
See "Listening to digital sound from other
inputs (DIGITAL ASSIGN)" (page 70).
20
US
Page
18
21
23
24
25
25
Video input/output jack to be
connected
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
HDMI
COMPONENT VIDEO
Digital
High quality image
Note
Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
P /
B
C
B
P /
R VIDEO
C
R
Analog