Makita 440 Instruction Manual page 18

EN
3
..... CONNECTING A POWER TOOL
TO THE VACUUM CLEANER
fi gures
(
- Plug the power tool into the socket on the motor unit, then plug the appliance into
the mains power supply (fi g. "A4").
CAUTION: The plug is designed for power tools with a maximum power rating of 2000 W
(fi g. "A5").
110V~ 60Hz version
• NEVER plug in power tools with a higher rating.
• NEVER plug more than one power tool into the socket on the motor
-------------------------------------------------------------------------
B - FILTER SYSTEMS
1
..... USING THE DUST COLLECTION BAG pack code 83134B0K
(fi g. "B1" - "B2")
Use the dust collection bag with the cartridge fi lter.
- Fit the paper fi lter bag into the drum (fi g. "B1").
- Fit the plastic fl ange (x) onto the air inlet connector (y).
Make sure you do not rip the bag (fi g. "B2").
Do not use for sharp or damp materials.
- Change bag when vacuumed material fi lls 3/4 of its capacity.
- The bag should not be reused, always replace the used bag with a new one.
2
..... USING THE CARTRIDGE FILTER pack code 83201BJA
(fi g. "B3" - "B4")
- Release the motor unit from the drum (fi g. "A1").
- Place the fi lter (b) on the motor housing (c) (fi g. "B3").
- Fit the plastic adapter disk (a) onto the fi lter (b) and attach the two parts together
by turning the knob in a clockwise direction (fi g. "B4").
- Refi t the motor unit to the drum.
- We strongly recommend using the cartridge fi lter to vacuum dust and solid debris;
it can be used with the paper bag that helps prevent the cartridge fi lter from
clogging and has the advantage of making the disposal of vacuumed debris quick
and sanitary.
Do not use for sharp or damp materials.
"A4" - "A5" - "A6")
unit.
The plug is designed for power tools with a
maximum power rating of 700 W (fi g. "A6").
- 18 -