Miele PFD 101 Operating Instructions Manual page 64

Programme options
Set the time by which the selected
programme needs to be finished.
 Use the  sensors to enter the
hour and confirm your entry with OK.
The hour will be saved and the minute
number block will be highlighted.
 Use the  sensors to enter the
minutes and confirm your entry with
OK.
The message Waiting for SmartStart
appear in the display.
The Start sensor lights up for a few
minutes.
The selected programme will start
automatically as soon as the energy
provider has sent the signal or when the
latest possible calculated start time has
been reached.
The time remaining will be shown in the
display, the  sensor will go out and
the Start sensor will light up.
64
Changing or deleting the timer
You can change the time set for the
timer or delete it.
 Touch the  sensor.
 Use the  sensors to select the
previously activated timer function
and confirm your entry with OK.
 Use the  sensors to select the
Change
with OK.
will
After confirming the
with OK, you can change the time set
for the timer.
After confirming the
OK, the duration of the selected
programme will appear in the display.
The  sensor goes out and the
Start sensor flashes.
You can now start a programme or
switch the dishwasher off.
Switching the dishwasher off while a
timer is running stops the timer.
You can also change the time set for
the timer or delete it using the
Miele@mobile App.
or Delete function and confirm
Change
Delete
function
function with