Changing Maintenance Mode To Normal Mode - Hitachi CE50-10 Instruction Manual

5. Configuring Software Environment
Run the showecmode command to check the next OS operation mode. Confirm that the display for Next has
changed to Maintenance mode (see the bold underlined part).
$ sudo showecmode
Current : Normal mode
Next : Maintenance mode
$
5. Stop the unit.
Run the shutdown command to stop the unit, and then turn off the power.
$ sudo shutdown -h 0
6. Unplug or connect the LAN cable.
Unplug the LAN cables to disconnect the unit from the remainder of the system. To connect the unit and the
maintenance PC, use the LAN cable to directly connect them.
7. Start the unit.
Turn on the power to the unit.
8. Log in to the unit.
login: edgeadm
Password: *******
9. Check the current OS operation mode.
Run the showecmode command to check the current OS operation mode.
Confirm that Maintenance mode is displayed for both Current and Next (see the bold underlined
parts).
$ sudo showecmode
Current : Maintenance mode
Next : Maintenance mode
$
5.14.4 Changing maintenance mode to normal mode
1. Log in to the unit.
login: edgeadm
Password: *******
2. Check the current OS operation mode.
Run the showecmode command to check the current OS operation mode. Confirm that Maintenance mode is
displayed for both Current and Next (see the bold underlined parts).
$ sudo showecmode
Current : Maintenance mode
Next : Maintenance mode
$
3. Specify normal mode for the next OS operation mode.
Run the ecmodeset command to specify Normal mode for the next startup of the OS (see the bold underlined
parts).
$ sudo ecmodeset -disable
Set next boot : Normal mode
$
4. Check the setting of the next OS operation mode.
Run the showecmode command to check the next OS operation mode. Confirm that the display for Next has
changed to Normal mode (see the bold underlined parts).
$ sudo showecmode
Current : Maintenance mode
Next : Normal mode
$
74