Indicator And Warning Lights - Yamaha YW50A Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
To unlock the steering
1
1
2
3
ZAUM00**
1. Turn.
4 2. Release.
Push the key in, and then turn it to
5
"OFF" while still pushing it.
6
7
8
9

Indicator and warning lights

2
ZAUM00**
1. Turn signal indicator light "4"6"
2. High beam indicator light "&"
3. 2-stroke engine oil level warning light
"7"
Turn signal indicator light "4 6"
This indicator light fl ashes when the
turn signal switch is pushed to the left
or right.
High beam indicator light "&"
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU11004
1 2 3
20
30 40
10 20
30
50
10
km/h
60
40
0 0
MPH
0000001
EAU11020
EAU11080
3-2
2-stroke engine oil level warning
light "7"
The warning light comes on if the key
is in the "*" position or when the en-
gine oil level in the 2-stroke engine
oil tank is low during operation. If the
warning light comes on during opera-
tion, stop immediately and fi ll the oil
tank with YAMALUBE 2 or an equiva-
lent 2-stroke engine oil. The warning
light should go off after the 2-stroke
engine oil tank has been refi lled.
TIP
If the 2-stroke engine oil level warning
light does not come on when the key
is in the "*" position or does not go off
after the 2-stroke engine oil tank has
been refi lled, have a Yamaha dealer
check the electrical circuit.
NOTICE
Do not operate the vehicle until you
know that the 2-stroke engine oil
level is suffi cient.
EAU1044E
EAU32442
ECA12720