Stopping Engine; Procedure - Yamaha F115 Owner's Manual

Operation
 If the trolling speed has been adjusted, the
engine returns to the normal trolling speed
when the engine is stopped and restarted
or when the engine speed exceeds ap-
proximately 3000 r/min.
EMU27822

Stopping engine

Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU42441

Procedure

1. Push and hold the engine stop button or
turn the main switch to "
71
" (off).
2.
3.
4.
5.
ON
OFF
ON ON
OFF OFF
After stopping the engine, disconnect
the fuel line if there is a fuel joint on the
outboard motor.
Tighten the air vent screw on the fuel
tank cap (if equipped).
Remove the key if the boat will be left un-
attended.
If equipped with the Yamaha Security
System: When you leave your boat, set
the Yamaha Security System to the lock
mode by pressing the lock button of the
ZMU06932
ZMU05833