The Ethernet Converter configuration is complete. Disconnect the Ethernet
◗
Converter from the network connection and power adapter, and move it to the
desired location.
Plug the Ethernet Converter's LAN port into the wired device that requires the
◗
wireless Ethernet Converter (devices could be an XBox, PS2, Home Theatre
Media Adapter, or another computer system). Plug the AC Adapter into a nearby
power outlet and connect the power connector to the Ethernet Converter. Power
cycle the network device that is connected to the Ethernet Converter.
If you set a static IP address on your computer on 'Page 8', then reference the
◗
operating system documentation to restore the IP settings to obtain an IP
Address automatically.
For additional settings and features, please see the Ethernet Converter Manual
◗
located on the Ethernet Converter CD-ROM.
13