Note: During the installation, ensure that you align the memory module to the slot and press down on both
ends until the latches are fully engaged with a click.
PCI-Express connector cable
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the "Computer cover" on page 40.
2. Disconnect the cable from the system board.
Removal steps
PCI-Express card
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove the "Computer cover" on page 40.
.
Chapter 7
CRU replacement
53