Advertisement
Quick Links
Use this guide to quickly and easily
install your Wireless USB Adapter-g.
For detailed setup and configuration
information, refer to the User Manual on
the USB Utility CD or the Buffalo Wireless
Support Web Pages.
Contents
◗ 54Mbps Wireless USB Adapter
USB Cable
◗
USB Utility CD with Manual
◗
- USB Drivers
- OS Patches
- Client Manager Utility
Quick Setup Guide
◗
Warranty Statement
◗
If any items are missing, please contact
the reseller from whom you purchased
this product.
System Requirements
Desktop or Notebook PC with an
◗
available USB port
◗ 10 MB of available disk space
802.11b or 802.11g access point
◗
(Infrastructure Mode) OR a different
computer with an 802.11b or 802.11g
wireless adapter (Ad-hoc Mode).
USBG54 QSG final.indd
1
Quick Setup Guide
54Mbps Wireless USB Adapter-g
Depending on your operating
◗
system, methods of preparing your
computer for installation will vary.
Please ensure that the installation
procedures being used are for
your operating system.
Please visit us online for
the latest User Manuals,
software and drivers at:
www.buffalotech.com/wireless
1
WLI-USB-G54
PY00-29006-DM20
9/22/03, 10:08 PM
®
Advertisement
Related Manuals for Buffalo Buffalo AirStation WLI-USB-G54
Summary of Contents for Buffalo Buffalo AirStation WLI-USB-G54
- Page 1 Use this guide to quickly and easily install your Wireless USB Adapter-g. For detailed setup and configuration information, refer to the User Manual on the USB Utility CD or the Buffalo Wireless Support Web Pages. Contents ◗ 54Mbps Wireless USB Adapter USB Cable ◗...
-
Page 2: Windows 2000
System Requirements by Operating System This is a high-speed USB 2.0 product. For Windows XP and Windows 2000 users it may be necessary to update and patch your operating system to take full advantage of the speed of USB 2.0 as follows. To check which Service Pack, if any, is currently installed, click Start - Run and type msinfo32 and click OK. -
Page 3: Windows Xp Installation
Windows XP Installation & Configuration Note: It is not necessary to use a AC adapter for power, as the USB will receive power via the USB cable. However, some legacy USB ports will not provide ample power, and a power cable will be provided if necessary. Contact customer support for more information on this issue. - Page 4 Windows XP users have the option of using Windows’ built-in Wireless Zero Configuration service to manage the wireless card or Client Manager from Buffalo Technology, which is included on the CD. If Client Manager is used, the Wireless Zero Configuration service should be disabled by entering the Contol Panel - Administrative Tools - Services and changing the WZC service state to disabled.
- Page 5 For more information about configuring and operating your Wireless USB Adapter and Client Manager, refer to the Buffalo Support Web Site. Note: Buffalo Technology recommends that users of the Wireless Zero Configuration Service upgrade to the latest version freely available at www.microsoft.com.
- Page 6 Windows 2000 Installation & Configuration USBG54 QSG final.indd Step ◗ Installing the Wireless USB Adapter-g Insert the Wireless USB Adapter, ◗ cable into an available USB port. USB ports are usually located in the front or rear of the computer. Once the Wireless USB Adapter is installed correctly, the Found New Hardware Wizard will...
- Page 7 When the Wireless USB Adapter driver is successfully installed, click the Finish button. Restart your computer if prompted. You have finished installing your AirStation 54Mbps Wireless USB Adapter-g. See Installing Client Manager to install Client Manager on your computer to complete the setup process. USBG54 QSG final.indd The setup process will locate the ◗...
- Page 8 Windows 98SE/ME Installation & Configuration You have finished installing your Wireless USB Adapter-g. See Installing Client Manager to install Client Manager on your computer to complete the setup process. USBG54 QSG final.indd Depending on the operating system used, some windows may appear slightly different.
-
Page 9: Installing Client Manager
Installing Client Manager Select Start»Run and enter D:\CM\ Setup.exe in the Open field to open the dialog box manually. D: represents the letter assigned to the CD-ROM drive. If another letter is assigned to the CD-ROM drive, your command should reflect that difference. Click the OK button. - Page 10 Confirm that the installation location for the software is acceptable.T o select an alternate installation location,click the Browse button and select another location.Click the Next button to continue to the Select Components page. Select the components you want to install and click the Next button to continue to the Start Copying Files page.
- Page 11 Depending on the operating system, some screens may vary from those shown in this guide. However, by accepting default installation settings, Client Manager should properly install. For more information about configuring and operating your Wireless USB Adapter-g and Client Manager, refer to the Buffalo Support Web Site: http://www.buffalotech.com/wireless/support.
- Page 12 Copyright © 2003 Buffalo Technology, Inc. All Rights Reserved. Buffalo Technology (USA) Inc., is part of MELCO INC., the global manufacturers of IT peripherals, including memory, networking, and multimedia products, inside many of the world’s computers. All trademarks are property of their USBG54 QSG final.indd...