Change An Advanced Port-Based Vlan - NETGEAR S8000 User Manual

Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select SWITCHING.
The QOS page displays.
5. From the menu on the left, select VLAN.
The VLAN page displays.
If you did not yet activate the Advanced Port-Based VLAN mode, see Activate the
Advanced Port-Based VLAN Mode on page 48.
6. In the Advanced Port-Based VLAN section, click the ADD VLAN button.
7. Specify the settings for the new VLAN:
• VLAN Name. Enter a name from 1 to 14 characters.
• VLAN ID. Enter a number from 1 to 8.
• Ports. Select the ports that you want to include in the VLAN through a combination
of the following actions:
- Click the icon for an unselected port to add the port to the VLAN.
- Click the icon for a selected port to remove the port from the VLAN.
Click the Select All link to add all ports to the VLAN.
-
Click the Remove All link to remove all selected ports from the VLAN.
-
The icon for a selected port displays purple.
Note: If ports are members of the same LAG, you must assign them to the same
VLAN.
8. Click the APPLY button.
Your settings are saved. The new VLAN is added to the VLAN table, which shows
the port members for each VLAN.

Change an Advanced Port-Based VLAN

You can change the settings for an existing advanced port-based VLAN.
Use VLANS for Traffic
Segmentation
50 User Manual