Dell Dimension E520 Owner's Manual page 118

Maintenance
SERR DMI Message
(On default)
Load Defaults
Event Log
POST Behavior
Fastboot
(On default)
Numlock Key
(On default)
POST Hotkeys
(Setup & Boot Menu
default)
Keyboard Errors
(Report default)
118
Appendix
Controls the SERR DMI message mechanism.
NOTE:
Some graphics cards require that the SERR DMI message mechanism be
disabled.
Restores system setup options to their factory defaults.
Allows you to view the Event Log. Entries are marked R for Read and U for
Unread. Mark All Entries Read puts an
clears the Event Log.
When enabled, this feature reduces computer startup time by bypassing some
compatibility steps.
• Off — does not skip any steps during computer startup
• On — starts the system more quickly
Determines the functionality of the numeric keys on the right side of your
keyboard.
• Off — commands the right keypad keys to function as arrows
• On — commands the right keypad keys to function as numbers
Determines whether the sign-on screen displays a message stating the
keystroke sequence that is required to enter the Setup program or the
Quickboot feature.
• Setup & Boot Menu — displays both messages
(F2=Setup and F12=Boot Menu)
• Setup — displays the setup message only (F2=Setup)
• Boot Menu — displays the Quickboot message only (F12=Boot Menu)
• None — displays no message
When set to Report and an error is detected during POST, the BIOS will
display the error message and prompt you to press <F1> to continue or press
<F2> to enter system setup.
When set to Do Not Report (disabled) and an error is detected during POST,
the BIOS will display the error message and continue booting the system.
to the left of all entries. Clear Log
R