• Using the recoil starter:
a. Turn the engine switch to the
ON position.
b. Pull the starter grip lightly until
you feel resistance; then pull
briskly in the direction of the
arrow as shown.
• Do not allow the starter grip
to snap back against the
engine. Return it gently to
prevent damage to the
starter.
• Do not let the starter rope rub
against the generator body,
or the rope will wear out
prematurely.
• Be careful not to hit your
hand against the handle
when pulling the starter grip.
6. If you wish to use the Auto Throttle
system, turn the Auto Throttle
switch to the ON position after the
engine has warmed up for 2 or 3
minutes.
ON
ENGINE SWITCH
Direction to pull
AUTO THROTTLE SWITCH
OPERATION
STARTER
GRIP
ON
47