Siemens EX8 LX6 Series Instruction Manual page 29

Setting procedure
Attach the temperature sensor to the saucepan; see
1.
the section on ~ "Preparing and maintaining the
wireless temperature sensor"
Place a saucepan filled with sufficient liquid on the
2.
required hotplate and always put the lid on.
Press the symbol on the wireless temperature
»
3.
sensor. The indicator
panel.
Select the hotplate on which you have placed the
4.
saucepan with the temperature sensor.
Select the right temperature setting from the table.
5.
The function has now been activated.
The temperature symbol
or oil has reached the right temperature for adding
the food. A signal will sound and the temperature
symbol will stop flashing.
Once the signal has sounded, take the lid off and
6.
add the food. Keep the lid on during cooking.
Do not cover the pan when using the "Frying
Note:
with a large amount of oil in the saucepan" function.
Switching off cooking functions
Select the hotplate and set it to
The hotplate will switch off and the residual heat
indicator will appear.
To re-activate the cooking functions, wait for
Note:
approximately 10 seconds.
õ will light up in the control
will flash until the water
õ
in the control panel.
‹
Cooking assist functions
en
29