Baileigh BV-5I Operator's Manual

Baileigh BV-5I Operator's Manual

5” industrial bench vise with pipe jaws

Advertisement

Quick Links

OPERATOR'S MANUAL
5" INDUSTRIAL BENCH VISE WITH PIPE JAWS
INTRODUCTION
The quality and reliability of the components assembled on a Baileigh Industrial machine guarantee near perfect
functioning, free from problems, even under the most demanding working conditions. However, if a situation arises,
refer to the manual first. If a solution cannot be found, contact the distributor where you purchased our product.
Make sure you have the serial number and production year of the machine (stamped on the nameplate). For
replacement parts refer to the assembly numbers on the parts list drawings.
Our technical staff will do their best to help you get your machine back in working order.
In this manual you will find: (when applicable)
Safety procedures
Correct installation guidelines
Description of the functional parts of the machine
Capacity charts
Set-up and start-up instructions
Machine operation
Scheduled maintenance
Parts lists
GENERAL NOTES
After receiving your equipment remove the protective container. Do a complete visual inspection, and if damage is
noted, photograph it for insurance claims and contact your carrier at once, requesting inspection. Also contact
Baileigh Industrial and inform them of the unexpected occurrence. Temporarily suspend installation.
Take necessary precautions while loading / unloading or moving the machine to avoid any injuries.
Your machine is designed and manufactured to work smoothly and efficiently. Following proper maintenance
instructions will help ensure this. Try and use original spare parts, whenever possible, and most importantly; DO
NOT overload the machine or make any modifications.
REPRODUCTION OF THIS MANUAL IN ANY FORM WITHOUT WRITTEN APPROVAL OF BAILEIGH INDUSTRIAL
HOLDINGS LLC IS PROHIBITED. Baileigh Industrial Holdings LLC, Inc. does not assume and hereby disclaims any
liability for any damage or loss caused by an omission or error in this Operator's Manual, resulting from accident,
negligence, or other occurrence.
BV-5I
1
© 2020 Baileigh Industrial Holdings LLC
1
Rev. 04/2020

Advertisement

Table of Contents
loading

Summary of Contents for Baileigh BV-5I

  • Page 1 5” INDUSTRIAL BENCH VISE WITH PIPE JAWS INTRODUCTION The quality and reliability of the components assembled on a Baileigh Industrial machine guarantee near perfect functioning, free from problems, even under the most demanding working conditions. However, if a situation arises, refer to the manual first.
  • Page 2 THANK YOU & WARRANTY Thank you for your purchase of a machine from Baileigh Industrial. We hope that you find it productive and useful to you for a long time to come. Inspection & Acceptance. Buyer shall inspect all Goods within ten (10) days after receipt thereof. Buyer’s payment shall constitute final acceptance of the Goods and shall act as a waiver of the Buyer’s rights to inspect or...
  • Page 3: Technical Support

    Baileigh Industrial makes every effort to ensure that our posted specifications, images, pricing and product availability are as correct and timely as possible. We apologize for any discrepancies that may occur. Baileigh Industrial reserves the right to make any and all changes deemed necessary in the course of business including but not limited to pricing, product specifications, quantities, and product availability.
  • Page 4: Safety Precautions

    All Baileigh machines should be used only for their intended use. • Baileigh does not recommend or endorse making any modifications or alterations to a Baileigh machine. Modifications or alterations to a machine may pose a substantial risk of injury to the operator or others and may do substantial damage to the machine.
  • Page 5 10. Keep work area clean. Cluttered areas invite injuries. 11. Overloading machine. By overloading the machine, you may cause injury from flying parts. DO NOT exceed the specified machine capacities. 12. Do not force tool. Your machine will do a better and safer job if used as intended. DO NOT use inappropriate attachments in an attempt to exceed the machines rated capacity.
  • Page 6: Specifications

    33. Do not use this tool while tired or under the influence of drugs, alcohol or medication. 34. Keep bystanders, especially children, away from the area while using the vise. 35. Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” are careless acts that can result in serious injury.
  • Page 7: Operation

    OPERATION • Mount vise to work surface in desired location by securing all mounting flanges located on base. See Dimension drawing at back of document. Use four 3/8” diameter bolts, 2 inches longer than the bench top thickness, flat washers and nuts (customer supplied). •...
  • Page 8: Replacement Parts

    Description Qty. 5I-1 Rubber Rings Stationary Body 5I-2 Handle 5I-11 Locking Nut and Handle 5I-3 Spindle 5I-12 BAILEIGH Logo Plate 5I-4 Spring Pin 3x24mm 5I-13 Spindle Nut 5I-5 Spindle Spring 5I-14 Hexagon Head Setting Screw 5I-6 Spindle Washer 5I-15 Plate Rivets...

Table of Contents