Auto provisioning
Manual configuration
This chapter describes how to set UAD settings, create PBXware extension and register the
phone.
The following topics are covered:
UAD settings
Creating extension
Registering phone
UAD Settings
UAD settings
Login to PBXware web administration interface
Open a new browser window and enter the IP address in order to access the PBXware web
administration login screen. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
UAD settings
Navigate to Settings:UAD.
Make sure Obihai UAD is enabled. To check the UAD status click on the edit icon
corresponding to your Obihai phone.
Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.
Click on the Save button to save changes.
Creating extension
Creating Extension
Add Extension
Navigate to Extensions. Click on Add Extension.