Page 1
C L 2 G M U L T I - L I N E L A S E R I N S T R U C T I O N M A N U A L...
Page 2
SAFETY Read the following safety instructions • Tool service must be performed only by qualified before attempting to operate this product. repair personnel. Repairs, service or maintenance performed by unqualified personnel will void the Keep these instructions in a safe place or store warranty.
Page 3
SAFETY (continued) • Do not let children come in contact with the laser. CAUTION: Class 2 Laser Product • Turn the laser off when it is not in use. Leaving • Never look into the laser beam directly the laser on increases the risk of staring into the and intentionally.
ITEM CHECKLIST Please ensure the following items are included with your laser level. If anything is missing please contact your retailer. INCHES Lasertec CL2G Magnetic mount Laser target AA alkaline batteries Carry pouch...
Page 5
LASER OVERVIEW: FRONT Control panel Laser port Laser port Locking switch Battery door cover 1/4” tripod thread...
Page 6
LASER OVERVIEW: CONTROL PANEL • Power LED pulse mode indicator • Pulse mode (press and hold for 3 seconds)
Page 7
MAGNETIC MOUNT OVERVIEW Screw fixing point Screw fixing point Magnet 5/8” x 11 thread 1/4” thread Magnet Rotating base 5/8” x11 thread 1/4” thread thumb screw 1/4” thread...
Page 8
USING YOUR LASER POWER SUPPLY OPERATION • The instrument is powered by four AA alkaline Powering on (self levelling) batteries. • To turn the instrument on, slide the locking Battery Replacement switch to the “unlocked” position. Self levelling will commence and all beams will activate. • Remove the battery cover door and the batteries.
Page 9
USING YOUR LASER (continued) Always slide the locking switch to the “locked” position when transporting the instrument or moving around the job site. Tilt lock function (manual mode) • Ensure the locking switch is in the “locked” position. Self-levelling beam position (recommended) • Press the power button to activate the laser beams.
Page 10
USING YOUR LASER (continued) USING THE MAGNETIC MOUNT Mounting onto a tripod Mounting onto a magnetic surface • Attach the mount onto the tripod via the 1/4” or • Attach the instrument to the mount using the 1/4” 5/8” x11 thread. thumb screw.
Page 11
USING YOUR LASER (continued) USING AN OPTIONAL DETECTOR • Press and hold the power button for 3 seconds to enter into pulse mode. The LED pulse mode indicator will illuminate to show pulse mode is active. • Switch the detector on by pressing the power button.
TROUBLE SHOOTING Error Cause & Solution • Check the batteries. They may be in the wrong way or need replacing. Laser does not turn on • Check the battery compartment for signs of damage. Ensure they are clean and not bent. • Check the batteries.
CARE AND MAINTENANCE • This is a precision measuring instrument • The operator should check the accuracy of the and should always be handled with care and instrument before precision levelling is attempted. transported within the carry pouch provided. Failure to do so may result in inaccurate measurements.
WARRANTY 3 YEAR STANDARD WARRANTY PERIOD 7 YEAR EXTENDED WARRANTY PERIOD 1. The warranty period for your tool is 3 years from 1. The extended warranty is available on selected the date of purchase. tools only. 2. The warranty period for batteries, battery packs 2.
Page 15
WARRANTY (continued) AUSTRALIA NEW ZEALAND “Our goods come with guarantees that cannot be For more information please visit excluded under the Australian Consumer Law. You consumerprotection.govt.nz are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
CUSTOMER SUPPORT To assist you with any queries or technical questions please contact customer support Australia: 1300 658 338 New Zealand: 0800 367 527...
SPECIFICATIONS Specifications Lasertec CL2G Product code 91280 Warranty 7 Years* Accuracy ±2mm at 10m Operating range 50m (with optional detector) Levelling range ±4° Laser class 2 Green Battery life 5 hours Battery type 4x 1.5v AA Vertical lines Horizontal lines...