Advertisement
d
c
a
b
d
Tightening torque 6 N·m (0.6 kgf·m, 4.4 lb·ft)
a
e
g
c
g
b
a
Tightening torque 2.0 N·m (0.20 kgf·m, 1.5 lb·ft)
INSTALLING THE INCLUDED PARTS
3. Installing the handlebar
NOTICE
The handlebar a should not touch the frame
when it is turned fully to the left or right.
TIP
Install the handlebar a at an angle f at which it is
in line with to the handlebar stem e, as shown in
the illustration.
f
TIP
d
8 Tighten bolts d evenly in stages, in the order
8 Tighten in such a way that the gaps g above
4. Installing the display unit's button cell bat-
c
– 6 –
Install the handlebar a so that the knurled part
b is at the center of the handlebar holder c,
then tighten the 4 handlebar holder c bolts d
to the specified torque.
shown in the illustration.
and below the handlebar holder c are equal.
tery
Loosen the bolts a and remove the display unit
b from the bracket c.
Advertisement
