Optional Accessories (Sold Separately); Applications; Battery Removal/Installation; Charging - Hitachi WH 10DL Handling Instructions Manual

OPTIONAL ACCESSORIES (sold separately)

1. Battery (BCL1015)

APPLICATIONS

Driving and removing of machine screws, wood screws, tapping screws, etc.
○

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latch to remove the battery (see Figs. 1 and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see Fig. 2).
Latch

CHARGING

Before using the power tool, charge the battery as
follows.
1. Connect the charger power cord to the
receptacle
When connecting the plug of the charger to a
receptacle, the pilot lamp will blink in red (At
1-second intervals).
2. Insert the battery into the charger
Firmly insert the battery into the charger till it
contacts the bottom of the charger as shown in
Fig. 3.
Battery
Fig. 1
Handle
Insert
Pull out
Fig. 2
Battery
23
English
Latch
Push
Battery
Insert
Hole for connecting
the battery
Pilot lamp
Fig. 3