Overheating Protection - Miele KM 7678 FR Operating And Installation Instructions

Safety features

Overheating protection

All the induction coils and cooling
elements for the electronics are fitted
with an overheating protection
mechanism. Before the induction coils
and/or cooling elements get too hot, the
overheating protection activates in one
of the following ways:
Induction coils
– Any Booster function in operation will
be switched off.
– The set power level is reduced.
– The heat for an area switches off
automatically.  flashes alternately
with  in the timer display.
You can use the area again as usual
when the fault message has gone out.
Cooling elements
– Any Booster function in operation will
be switched off.
– The set power level is reduced.
– The heat switches off automatically.
The affected areas can only be used
again as usual once the cooling
element has cooled down to a safe
level.
42
The overheating protection may be
triggered under the following
circumstances:
– The pot or pan being used is empty.
– Fat or oil being heated on a high
power level.
– Insufficient ventilation to the
underside of the cooktop.
– A hot area being switched on after an
interruption to the power supply.
If, despite removing the cause, the
overheating protection mechanism
triggers again, contact Miele.