Ordering Options For Radios And Features; Dongle Enablement - Software Enablement Kits; Table 2: Rf Specification; Table 3: Gps Specification - Motorola MTP850 S Product Information Manual

Table 2: RF Specification

Parameter
Frequency Bands MHz
RF Channel Bandwidth kHz
Transmitter RF Output Power W
RF Power Control
RF Power Level Accuracy +/-dB
Adaptive Power Control
Receiver Class
Receiver Static Sensitivity dBm
Receiver Dynamic Sensitivity dBm

Table 3: GPS Specification

Parameter
Simultaneous Satellites
GPS Antenna
Sensitivity
Accuracy (Measured at -137 dBm)
Protocols
Note: This specification may be subject to change without further notice. All product features are subject to
infrastructure support. Selected features are subject to optional software upgrade.

Ordering Options for Radios and Features

TETRA terminals are only available to accredited channel partners who are advised of the discount structure applied
to these products.
Software options can be ordered and enabled in three ways:
• You can have them enabled at the Distribution Centre (DC).
• If you have iTM, you can enable them with a license.
• You can order by using a dongle.
Dongle Enablement – Software Enablement Kits
Each software enablement kit ordered provides one dongle for the customer with a specific number of counters set
according to the number of software options ordered. This kit number is applicable to both new orders or existing
fielded terminals which require software enablement.
Value
380–430 MHz
25
1 (Class 4) and 1.8 (Class 3L 1.8 W)
3 Steps of 5 dB
2
A and B
A and B
-112 minimum (-115 typical)
-103 minimum (-107 typical)
Value
12
Helical - integrated into TETRA Antenna
-152 dBm / -182 dBW
5 meters - 50% probable
10 meters - 95% probable
ETSI LIP & Motorola LRRP
68015000878-G | |
Product Overview | 17
Send Feedback