D-Link DWL-G820 Manual page 16

Using the Configuration Menu (continued)
Wireless Band-
IEEE802.11g
Frequency-
The frequency remains at 2.437 GHz.
Channel-
Select from channels 1-11.
Fragment Length-
The fragmentation threshold, which is
specified in bytes, determines whether
packets will be fragmented. Packets
exceeding the 2346 byte setting will be
fragmented before transmission. 2346
is the default setting.
RTS Length-
Transmit Power-
Super G Mode-
Disabled-
Super G
without Turbo-
Super G with
Dynamic
Turbo-
Super G with
Static Turbo-
Radio Wave-
This value should remain at its default setting of 2346. If you
encounter inconsistent data flow, only minor modifications to
the value range between 256 and 2346 are recommended.
Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum power.
Super G is a group of performance enhancement features that
increase end user application throughput in an 802.11g network.
Super G is backwards compatible to standard 802.11g devices. For
top performance, all wirelss devices on the network should be Super
G capable. Select either Disabled, Super G without Turbo, Super G
with Dynamic Turbo, or Super G with Static Turbo.
Standard 802.11g support, no enhanced capabilities.
Capable of Packet Bursting, FastFrames, Compression, and no
Turbo mode.
Capable of Packet Bursting, FastFrames, Compression, and
Dynamic Turbo. This setting is backwards compatible with
non-Turbo (legacy) devices. Dynamic Turbo mode is only
enabled when all devices on the wireless network are configured
with Super G with Dynamic Turbo enabled.
Capable of Packet Bursting, FastFrames, Compression, and Static
Turbo. This setting is not backwards compatible with non-
Turbo (legacy) devices. Static turbo mode is always on and
is only enabled when all the devices on the wireless network are
configured with Super G with Static Turbo enabled.
Select ON or OFF.
Advanced > Performance
16