Download
Share
Print this page
D-Link AirPro DWL-6000AP Quick Installation Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Access Point
  5. AirPro DWL-6000AP
  6. Quick installation manual
D-Link AirPro DWL-6000AP Quick Installation Manual

D-Link AirPro DWL-6000AP Quick Installation Manual

D-link dwl-6000ap : install guide
Hide thumbs Also See for AirPro DWL-6000AP:

Advertisement

Quick Links

Download this manual See also: Reference Manual, User Manual
This product can be set up using any
current web browser, i.e., Internet
Explorer 5x, Netscape Navigator 4x.

Before You Begin

It's best to use a computer with an Ethernet adapter for configuring the DWL-6000AP.
The default IP address for the DWL-6000AP is
255.255.255.0. You will need to assign your computer a Static IP address within the
same range as the DWL-6000AP's IP address for the purpose of configuring the DWL-
6000AP. See the Appendix if you need assistance in assigning a Static IP address
for your network adapter.
Check Your Package Contents
These are the items included with your DWL-6000AP purchase:
If any of the above items are missing, please contact your reseller.
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective
holders. Software and specifications subject to change without notice. DWL-6000AP.01232003
192.168.0.50
• DWL-6000AP Wireless Access Point
• CD-ROM (containing Manual and
Warranty)
• Ethernet (CAT5 UTP/Straight Through)
Cable
• 5V DC, 2.5A Power Adapter
DWL-6000AP
D-Link AirPro™ 2.4GHz/5GHZ
Wireless Access Point
with a Subnet Mask of
Using a power
supply with a
different voltage rating
will damage and void
the warranty for this
product.

Advertisement

loading

Related Manuals for D-Link AirPro DWL-6000AP

Summary of Contents for D-Link AirPro DWL-6000AP

  • Page 1: Before You Begin

    • 5V DC, 2.5A Power Adapter If any of the above items are missing, please contact your reseller. ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-6000AP.01232003 DWL-6000AP D-Link AirPro™...
  • Page 2 First, connect the power adapter to the receptor at the back panel of the DWL-6000AP and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.

  • Page 3: Using The Setup Wizard

    When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type “http://192.168.0.50” into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear.
  • Page 4 Using The Setup Wizard (continued) Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens. Click Next...
  • Page 5 Step 1 - Set up your new password. You have the option to establish a password. Click Next Step 2 - Wireless Setup for your 802.11a Connection. The default wireless settings are: SSID = default Channel = 36 You can change these settings to match an existing wireless network.
  • Page 6 Click Next If you enable encryption on the DWL-6000AP make sure to also enable encryption on all 802.11a wireless clients or wireless connection will not be established Step 4 - Wireless Setup for your 802.11b Connection.
  • Page 7 Click Next If you enable encryption on the DWL-6000AP make sure to also enable encryption on all 802.11b wireless clients or wireless connection will not be established Your Setup is Complete! Click Restart...
  • Page 8 For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-management interface; or to the manual located on the CD-ROM. For managing several DWL-6000s, please install the D-Link AirPro Multiple AP Manager from the DWL-6000 CD-ROM.
  • Page 9 Microsoft Windows XP: Go to Start > right click on My Network Places > select Properties > Double-click on the Network Connection associated with the Ethernet adapter (i.e., D-Link DFE-530TX+). Click Internet Protocol (TCP/IP) Click Properties Select Use the following IP address...
  • Page 10 Setting a Static IP address for Apple Macintosh OS X: Go to the Apple Menu and Select System Preferences. Select Built-in Ethernet in the Show pull-down menu Select Manually the Configure pull- down menu Enter the IP address information, the Subnet Mask and the Router’s IP address.
  • Page 11 NOTES...

  • Page 12: Technical Support

    Technical Support Software updates and documentation are available on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone.