Table of Contents
Advertisement
Section - Configuration
Factory Reset
DVX-1000 configuration parameters can be set to factory default values through web or 'RESET' switch on DVX-1000.
The following section describes the functionality of the factory reset feature.
Factory Reset through Web
Click on the Factory Reset link in the menu. Click on Apply and select Yes. The factory reset will start now.
Factory Reset using RESET Switch
Press and release the RESET button on the panel of the board. Please take care not to keep the button pressed for
more than 2 seconds.
Factory Reset Functionality
Factory Reset has to be enabled with caution. This is because several settings/configuration options that have been
modified will be restored to the factory defaults. When factory reset is enabled from the web interface of the DVX-1000
the following changes will be effected to the system:
• Licensing and feature information: All the licensed features that exist at the time of factory reset will be retained
across the reset.
• Users and User Groups: Users and the user groups that have been configured will remain as they are (i.e. after factory
reset, the administrator does not have to add the users and their groups again). Though the users are still configured,
all the features that have been enabled for the users are now disabled. The users now have no features activated and
the feature password is reset back to the User ID of the user.
• Route Groups: All the configured users will be moved to the default route group (LocalRouteGroup) with only a single
local route group configured. Any special routes that need to be added for the users will have to be reconfigured after
factory reset.
D-Link DVX-1000 User Manual
Advertisement
Table of Contents
