D-Link DVG-1120M Manual page 15

Web-based Management (continued)
Configure LAN Port > NAT Configuration > Virtual Server Configuration
(continued)
The items on this
window are described
below:
Index - Choose the
index number that you
would like to edit (Form
1 to 6).
Protocol - Choose the
protocol either TCP or
UDP.
Global Port Range -
Enter the designated
TCP or UDP protocol port number for the particular protocol packet you wish to
redirect.
Local Port Range - Enter the port number used by the designated host on the
LAN or use a well-known port.
Server IP - Enter the IP address of the local designated host computer or
device.
State - This toggles Disable and Enable for the Virtual Server Configuration
function.
Click Save to save the settings.
15