D-Link AirPlus DP-G310 Quick Installation Manual page 3

Setting up your DP-G310 for network
printing in Windows XP
For additional Windows operating system setup or information
on the Web-management interface, refer to the manual located
on the CD-ROM.
The factory default IP address of the DP-G310 is 192.168.0.10. In order to network
to the printer through the DP-G310, the DP-G310 must have the same IP network
settings as your network.To access the Print Server's Web configuration interface,
assign an IP address on one of the wired PCs on your network to the same IP
scheme as the Print Server.
Go to Start > Right-click on
My Network Places
select Properties > Double-click on
the Network Connection associated
with your Network Adapter
Click Internet Protocol (TCP/IP)
Click Properties
Input a static IP address in the
same range as the print server.
Select Use the following IP address
IP address: 192.168.0.52
Subnet mask: 255.255.255.0
Click OK
>
.
3