Recording (Cont.)
Scheduled Recording (in DTV mode only)
The TV is able to record programmes when the TV is turned on or in Standby
mode.
Press the EPG button to view the TV Guide.
•
•
Select the program you wish to record and press the
•
Press the
/
are: Once, Everyday and Weekly.
•
You can further adjust the start and end dates and times by pressing
the
/
/
After you have finished adjusting settings to desired options, press OK to
•
confirm and save the scheduled recording.
NOTE:
•
You can set up several schedule programmes to record. Different
schedules should not overlap and there must be at least a 1 minute time
gap to set up between two schedules.
•
If the schedule conflicts with another scheduled recording, 'Overlay'
message will appear. Then review the Schedule List (press the
YELLOW button while in the TV Guide) and reschedule your recording.
To watch a recorded programme
•
Press the MENU button on the remote control and navigate to System >
PVR File System > Record List.
•
Use the
/
playback in full screen mode.
•
Press the
•
When playing a recorded file, use the PLAY/STOP/PAUSE/REV/FF
buttons on the remote control to control the playback.
After Sales Support
Telephone:
Email:
button to edit the mode of recording. Available options
/
buttons.
buttons to select a recorded file and press OK to start
RED button to delete the selected file.
1300 886 649
info@tempo.org
RED button.
29