Enable Logging; Enable Audit Logging; Enable E-Mail Alerting For Ids/Idp Events - D-Link DFL-200 User Manual

Enable Logging

Follow these steps to enable logging.
Step 1. Enable SYSLog by checking the SYSLog box.
Step 2. Fill in your first SYSLog server as SYSLog server 1. If you have two SYSLog
servers, you have to fill in the second one as SYSLog server 2. You must fill in at least
one SYSLog server for logging to work.
Step 3. Specify what facility to use by selecting the appropriate SYSLog facility. Local0 is
the default facility.
Click the Apply button below to apply the settings or click Cancel to discard changes.

Enable Audit Logging

To start auditing all traffic through the firewall, follow the steps below. This is required when
running third party log analyzers on the logs or to see how much traffic specific connections
account for.
Follow these steps to enable auditing.
Step 1. Enable SYSLog by checking the Enable Audit Logging box.
Click the Apply button below to apply the settings or click Cancel to discard changes.

Enable E-mail alerting for IDS/IDP events

Follow these steps to enable E-mail alerting.
Step 1. Enable E-mail alerting by checking the Enable E-mail alerting for IDS/IDP
events checkbox.
Step 2. Choose the sensitivity level.
Step 3. In the SMTP Server field, fill in the SMTP server to which the DFL-200 will send
the e-mail alerts.
Step 4. Specify up to three valid email addresses to receive the e-mail alerts.
Click the Apply button below to apply the settings or click Cancel to discard changes.
22