Adjusting The Picture - Lenovo LXB-L17C User Manual

5. To exit and save the setting, press
MENU-key, or leave the monitor alone for 10 seconds.
6. When the OSD window is active, it shows the input signal timing. The
"H" Stands f o r the horizontal frequency and "V" stands for the vertical
frequency.
7. Press and
displayed rotated by 90°, and reapeat this action, the display will come
back the factory mode.
Figure 5 English OSD Message

ADJUSTING THE PICTURE

The description for function control LEDS
1. BRIGHTNESS & CONTRAST
1.1 BRIGHTNESS
Adjust the picture brightness.
1.2 CONTRAST
Adjust the picture contrast.
2. ADJUST POSITION
2.1 HORIZONTAL POSITION
Adjust the horizontal position of the picture.
2.2 VERTICAL POSITION
Adjust the vertical position of the picture.
3. VIDEO NOISE
3.1 FOCUS
Adjust the picture Focus.
3.2 CLOCK
Adjust the picture Clock.
during the power switch on.The OSD menu will be
10
or to the exit item and press
亮度和? 比度
位置? 整
? ? ? ?
? 言? ?
OSD ? 示? ?
色? ? 整
OSD 位置
退出菜?
恢复出厂模式
Figure 6 Chinese OSD Message