Show Igmpsnooping; Show Igmpsnooping Mrouter Interface - D-Link DES-3226L Cli Command Reference

Layer 2 switch, 24 port 10/100 managed switch plus 2 combo gigabit copper/sfp ports
Hide thumbs Also See for DES-3226L:
Table of Contents

Advertisement

show igmpsnooping

This command displays IGMP Snooping information. Configured information is displayed whether or
not IGMP Snooping is enabled.
Format
Mode
When you do not specify a parameter, the command displays the following information:
Admin Mode
Interfaces Enabled for IGMP Snooping
Multicast Control Frame Count
VLANs Enabled for IGMP Snooping
When you specify the <slot/port> or VLAN ID values, the following information prints to the screen:
IGMP Snooping Admin Mode
Fast Leave Mode
Group Membership Interval
Max Response Time
Multicast Router Present Expiration Time

show igmpsnooping mrouter interface

This command displays information about statically configured ports.
Format
Mode
Interface
Multicast Router Attached
VLAN ID
show igmpsnooping [<slot/port> | <vlanId>]
Privileged EXEC
This indicates whether IGMP Snooping is active on the switch.
Snooping is enabled.
This displays the number of multicast control frames
that are processed by the CPU.
Snooping is enabled.
This indicates whether IGMP Snooping is active on the
specified interface or VLAN.
Indicates whether Fast Leave mode is enabled.
Displays the amount of time in seconds that the device
waits for a report from a particular group on a particular interface before
deleting the interface from the entry.
Displays the amount of time the switch waits after it sends a query on
an interface, participating in the VLAN, because it did not receive a report for
a particular group on that interface.
removing an interface that is participating in the VLAN from the list of inter-
faces with multicast routers attached. The interface is removed if a query is
not received.
show igmpsnooping mrouter interface <slot/port>
Privileged EXEC
Shows the port on which multicast router information is being displayed.
Indicates whether or not multicast router is statically enabled
on the interface.
Displays the list of VLANs of which the interface is a member.
Switching Commands
This is the list of interfaces on which IGMP
Displays the list of VLANs on which IGMP
Displays the amount of time to wait before
65

Advertisement

Table of Contents
loading

Table of Contents