D-Link DNS-120 Manual page 21

Web Configuration
Advanced > FTP Server (continued)
Idle Time
Select a period between 1-10 minutes before the DNS-120 logs out the current user from
the FTP server.
Flow Control
Select Unlimited or enter a data rate (x10 KB) for restricted data flow. This setting is
only necessary where network traffic is significant and can be affected by FTP server
activity.
Click the Apply button to save changes and start the FTP server.
To reset the FTP Server options and start over, click the Cancel button. To access
online help for FTP Server, click the Help button.
NOTE: FTP Server port is set at 21. This cannot be changed.
FTP Server Status
Current FTP Server settings are reviewed in this section. If the FTP server is not started,
click on the Start FTP Server button to start. If the FTP server has started, click on the
Stop FTP Server button to stop.
Disclaimer - Unless additional precautions are taken, use of an FTP
server to access files over the Internet does not provide secure or
encrypted transmission. It is recommended that the end user utilize
a Virtual Private Network (VPN) to establish a secure FTP session.
21