Craftsman 172.417710 Operator's Manual page 4

4 volt slide screwdriver
Table of Contents

Advertisement

GENERAL SAFETY WARNINGS cont.
Do not short-circuit a cell or battery. Do not store cells or batteries haphazardly in a box or
9.
drawer where they may short-circuit each other or be short-circuited by conductive materials.
10. Do not subject cells or batteries to mechanical shock.
11. Keep cells and batteries clean and dry. Wipe the cell or battery terminals with
a clean dry cloth if they become dirty.
12. Do not maintain secondary cells and batteries on charge when not in use.
13. Retain the original cell and battery literature for future reference.
14. Do not use any charger other than that specifically provided for use with the tool.
Secondary cells and batteries need to be charged before use. Always use the correct charger
and refer to the manufacturer's instructions or tool manual for proper charging instructions.
15. When possible, remove the battery from the tool when not in use.
16. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
battery pack, picking up or carrying the tool. Carrying the tool with your finger on the switch or
energizing tool that have the switch on invites accidents.
17. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
18. Have servicing performed by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the product is maintained.
SAFETY SYMBOLS FOR YOUR TOOL
The label on your tool may include the following symbols.
To reduce the risk of injury, user
must read instruction manual
Wear ear protection
Li-Ion battery, battery
must be recycled
BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING
To reserve natural resources, please recycle or dispose of batteries properly.
This product contains lithium-ion batteries. Local, state or federal laws may
prohibit disposal of lithium-ion batteries in ordinary trash. Consult Your local
waste authority for information regarding available recycling and/or
disposal options.
WARNING: Upon removal of the battery pack for disposal or recycling, cover the battery
pack's terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble the
battery pack or remove any of its components. Lithium-Ion batteries must be recycled or
disposed of properly. Also, never touch the terminals with metal objects and/or body parts as
a short circuit may result. Keep away from children. Failure to comply with these warnings
could result in fire and/or serious injury.
CAUTION: LITHIUM ION BATTERY
Do Not Load or Transport Package if Damaged
For more information, call Within USA and Canada: 1-800-424-9300
Outside USA and Canada: +1-703-741-5970
Wear eye protection
Wear dust mask
5
DESCRIPTION
KNOW YOUR ELECTRIC SCREWDRIVER
(Fig. 1 & 2)
(Fig. 1)
5.
4.
10.
6.
11.
3.
(Fig. 2)
7.
8.
1. Slide button
6. Bit Cartridge
7. Charging Socket
2. Soft grip handle
3. On / Off switch with
8. Charging Indicator
forward and reverse
9. Charger
4. LED Light
10. 3" Extension Shaft
5. Chuck
11. Wobble bit
INCLUDED ACCESSORIES:
25 mm Screwdriver Bit
5
25 mm Pilot Hole Drill Bit
1
#2 Wobble bit
2
3" extension shaft
2
3~5H charger
1
1.
2.
9.
6

Advertisement

Table of Contents
loading

Table of Contents